Knuckle joints and hill's should come as a kit.
:
| ausmini https://www.ausmini.com/forums/ |
|
| Ball and cups https://www.ausmini.com/forums/viewtopic.php?f=2&t=95965 |
Page 1 of 1 |
| Author: | ricksmini [ Mon Aug 28, 2017 9:04 pm ] |
| Post subject: | Ball and cups |
Hi all what's the best way to replace the ball and cups in the suspension? How long does the job normally take? |
|
| Author: | gtogreen1969 [ Mon Aug 28, 2017 10:04 pm ] |
| Post subject: | Re: Ball and cups |
ricksmini wrote: Hi all what's the best way to replace the ball and cups in the suspension? How long does the job normally take? Hydro = Drop the pressure. Dry = Take out the top arm or cut the trumpet and fit HiLos after your done. Couple of hours to a couple of days. Depending on what else breaks. |
|
| Author: | peterb [ Tue Aug 29, 2017 6:50 am ] |
| Post subject: | Re: Ball and cups |
I don't want to dampen your enthusiasm but unless you really do know what you're doing or you can get someone who does to help/show you, it's not what I'd put in the 'handyman' job catagory. Trumpets can split, shatter trying to get old ones out. |
|
| Author: | peterb [ Tue Aug 29, 2017 6:52 am ] |
| Post subject: | Re: Ball and cups |
spring compressor for dry suspension |
|
| Author: | awdmoke [ Tue Aug 29, 2017 8:51 pm ] |
| Post subject: | Re: Ball and cups |
gtogreen1969 wrote: ricksmini wrote: Hi all what's the best way to replace the ball and cups in the suspension? How long does the job normally take? Hydro = Drop the pressure. Dry = Take out the top arm or cut the trumpet and fit HiLos after your done. Couple of hours to a couple of days. Depending on what else breaks. Yep. My favoured tools for removing the original trumpets are a BFH and a hatchet. |
|
| Author: | peterb [ Wed Aug 30, 2017 6:43 am ] |
| Post subject: | Re: Ball and cups |
Knuckle joints and hill's should come as a kit. :
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|