| ausmini https://www.ausmini.com/forums/ |
|
| mini starter motor https://www.ausmini.com/forums/viewtopic.php?f=2&t=96174 |
Page 1 of 1 |
| Author: | p7676 [ Tue Oct 17, 2017 4:16 pm ] |
| Post subject: | mini starter motor |
1970 Mini starter motor. I have just fitted a new Bendix to the starter motor and I have noticed there is about 2mm end play in the starter motor shaft and a small amount of side play. Will this cause any problems ? P7676 |
|
| Author: | peterb [ Tue Oct 17, 2017 8:38 pm ] |
| Post subject: | Re: mini starter motor |
Wasn't there a fibre washer in drive end that used to smash and fall out, causes end play. Too much side movement may cause poor meshing and or possible overlapping/jambing. |
|
| Author: | drmini in aust [ Tue Oct 17, 2017 9:32 pm ] |
| Post subject: | Re: mini starter motor |
New bronze bushes and brushes are still available from Karcraft, Minikingdomonline and others. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|