ausmini • View topic - ROH? Centre Caps

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

ROH? Centre Caps

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

cooperess

Post subject: ROH? Centre Caps

Posted: Wed Oct 11, 2017 4:54 pm

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

I think I have a set of ROH ini wheels but no centre caps, can anyone help me out?

Attachment:

Mini ROH Wheel I Think.jpg

You do not have the required permissions to view the files attached to this post.

Top

timmy201

Post subject: Re: ROH? Centre Caps

Posted: Wed Oct 11, 2017 5:21 pm

1275cc

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4493
Location: Wollongong, NSW

There are a couple of different centre bore sizes for those wheels. You'll need to measure the diameter.

I picked up a couple of spare ones from my local wheel repair shop.

_________________

Top

p7676

Post subject: Re: ROH? Centre Caps

Posted: Wed Oct 11, 2017 9:23 pm

998cc

Joined: Mon Dec 19, 2016 8:38 pm
Posts: 607

hard to get I am looking for 1
p7676

Top

cooperess

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 12:32 pm

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

Still looking.

Top

timmy201

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 1:26 pm

1275cc

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4493
Location: Wollongong, NSW

Do you know the diameter of the centre cap opening? There were at least two different sizes and styles over the years.

I have a set of the lower offset ones and one pair is the smaller hole and the other pair the larger hole. My centre caps have the part number 18021012 stamped inside

There are a couple on ebay of one type
https://www.ebay.com.au/itm/HOLDEN-ROH- ... SwmSdaVwLM

https://www.ebay.com.au/itm/HOLDEN-ROH- ... SwgeBaVv4R

https://www.ebay.com.au/itm/ROH-wheel-c ... SwhpZaRuvs

You could also try some new Performance brand ones if they match your wheel size
https://www.ebay.com.au/itm/Classic-Whe ... SwJQdW-lb6

You do not have the required permissions to view the files attached to this post.

_________________

Top

Bill B

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 2:09 pm

1275cc

Joined: Sat Feb 09, 2013 5:44 pm
Posts: 2236
Location: Camden

Re: timmy201 photos: I had the caps on the green car made by a metal spinner and then chrome-plated.

Top

timmy201

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 2:18 pm

1275cc

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4493
Location: Wollongong, NSW

Bill B wrote:

Re: timmy201 photos: I had the caps on the green car made by a metal spinner and then chrome-plated.

There are some here similar to yours Bill, possibly the top ones are the original type ones as they have the lip where it meets the hub?

You do not have the required permissions to view the files attached to this post.

_________________

Top

cooperess

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 2:23 pm

1098cc

Joined: Wed Sep 30, 2015 9:38 am
Posts: 1572
Location: Brandy Hill, NSW

Attachment:

contessa2.JPG

These are the caps I'm after. Thanks Tim

You do not have the required permissions to view the files attached to this post.

Top

timmy201

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 2:48 pm

1275cc

Joined: Sun Apr 29, 2012 1:19 pm
Posts: 4493
Location: Wollongong, NSW

That type look similar to the moke ones, 66mm diameter that goes into the wheels
http://minisport.com.au/moke-sunraysia- ... -word-moke
http://minisport.com.au/moke-sunraysia- ... less-steel

Also the trailer / hub / bearing dust caps are similar, just need to find some the right size?
http://www.ebay.com.au/itm/2x-Bearing-D ... SwnVVZnif-

https://www.ebay.com.au/itm/pair-of-3-t ... xyCGNTO4lc

https://www.ebay.com.au/itm/pair-of-2-t ... xyTMdTO3zA

_________________

Top

Bill B

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 2:57 pm

1275cc

Joined: Sat Feb 09, 2013 5:44 pm
Posts: 2236
Location: Camden

At one point before getting a set spun, I tried stainless steel kitchen measuring cups from $2 shops. They come in a nest of various sizes but none were close enough for my wheels.

Top

TheMiniMan

Post subject: Re: ROH? Centre Caps

Posted: Fri Feb 02, 2018 4:28 pm

Bimmer Twinky

Joined: Mon Sep 06, 2004 4:36 pm
Posts: 8606
Location: Brisbane

yes there are generally 2x types,,, the "Factory" wheel type (made by ROH for the factory)
& the 2nd type is the ROH brand, made for their own sales purposes.

sorry to whoeve rang us today asking for some, we only have caps for our own wheels & none spre at this stage "Except" one damaged on
we were concidering getting my guy in China to make a batch, but it`s a minimum oeder of 1000x
if someone is keen to buy 500x from them from me straight away then i would certainly concider getting them done :-)

It`s all easy, simple & fun :-)

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

Top

Page 1 of 1

[ 11 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 94 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: