Once again the Doc is right on the money.
I just checked my build HS2's, 1/4 inch spacer on a AEG347 manifold.
| ausmini https://www.ausmini.com/forums/ |
|
| HS2 carbon spacers https://www.ausmini.com/forums/viewtopic.php?f=2&t=96753 |
Page 1 of 1 |
| Author: | 70K1100 [ Mon Feb 05, 2018 6:33 pm ] |
| Post subject: | HS2 carbon spacers |
What size spacers are people using on their twin HS2 set ups? I'm part way through rebuilding my twin HS2s and the spacers that I have appear way to big leaving almost no length on the manifold studs. I'm using a standard 997 Cooper manifold. |
|
| Author: | drmini in aust [ Tue Feb 06, 2018 4:30 pm ] |
| Post subject: | Re: HS2 carbon spacers |
Pretty sure they used alloy spacers around 1/4" thick? Well the 2 twin HS 2 sets I had did. |
|
| Author: | Mozzie [ Tue Feb 06, 2018 5:30 pm ] |
| Post subject: | Re: HS2 carbon spacers |
Once again the Doc is right on the money. I just checked my build HS2's, 1/4 inch spacer on a AEG347 manifold.
|
|
| Author: | 70K1100 [ Thu Feb 08, 2018 8:17 am ] |
| Post subject: | Re: HS2 carbon spacers |
Thanks. I think the set I have are about 3/4" thick. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|