Hello All,
I am having trouble finding a new core or a good second hand one. Does anyone know where I can get a core.
TY Allen

This one?
https://minikingdomonline.com.au/produc ... r-s-mk1-2/

http://minisport.com.au/mini-cooper-s-heater-core

_________________

"and just requires inlet/ outlet tubes to be moved so it can be easily fitted."?

While awaiting other responses I suggest you do a search on heater core or similar.

I did and found this post where the owner replaced the core. Try a PM to him to see where he got it.

viewtopic.php?f=3&t=95728&p=1023097

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

Doug you are right, I did replace mine. The ones shown in the link fit our housings. I think the note about moving the inlet pipes refers to the Moke application only.
Mat

_________________
1970 Mk2 Cooper S

Have you tried John at MKO

https://minikingdomonline.com.au/produc ... r-s-mk1-2/

I’m on the middle of having mine re cored and having a right angle put on the pipes, do you have the old one that can be repaired??


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Incase your picture throws anyone. Its from a Beehive heater late 1970.

Yep I removed the tanks and the core is RS to fit a new core will cost $350.New one from John S $190. The radiator shop told me they cannot compete with the cost of new heater units .

Mine was slightly cheaper but I had the inlet pipes moved too. I also questioned it. Expensive for such a small core. I couldn't see the correct one for my car. Bit the bullet and had it done. Haven't picked it up yet so I hope they did a good job. Have had radiators done by them before and turned out pretty good.


Sent from my iPad using Tapatalk