AEG510 is listed by Vizard as the later cooper S cam.
10-50/51-21
252* duration
Valve lift (std rockers) 0.318".
Not real exciting.
They regrind nice to an RE-13 though... 
| ausmini https://www.ausmini.com/forums/ |
|
| Kent Cam https://www.ausmini.com/forums/viewtopic.php?f=2&t=9939 |
Page 1 of 1 |
| Author: | Gezo [ Tue Aug 09, 2005 8:15 pm ] |
| Post subject: | Kent Cam |
Hi, I have a Kent Cam for a 1275 motor. On the box it has AEG510 and on the Cam it is stamped A182KC510, does anybody know what Spec this cam is. Thanks |
|
| Author: | drmini in aust [ Tue Aug 09, 2005 8:29 pm ] |
| Post subject: | |
AEG510 is listed by Vizard as the later cooper S cam. 10-50/51-21 252* duration Valve lift (std rockers) 0.318". Not real exciting. They regrind nice to an RE-13 though...
|
|
| Author: | Gezo [ Tue Aug 09, 2005 8:53 pm ] |
| Post subject: | |
Hi, Thanks Dr, I was hoping it might have been something a bit wild. Thanks |
|
| Author: | justminis [ Tue Aug 09, 2005 9:15 pm ] |
| Post subject: | |
Is that a new 510 you have? I may be interested in it. |
|
| Author: | Gezo [ Wed Aug 10, 2005 2:02 pm ] |
| Post subject: | |
Hi, It is new Cam still in the (ripped) box. Thanks |
|
| Author: | Stuwey [ Wed Aug 10, 2005 11:52 pm ] |
| Post subject: | |
I gots me a new 286S(scatter) kent in my new motor. very nice, lots of midrange, but no huge lump at idle. How does this compare to the RE13? Vizard described the 286S as "The ultimate fast road cam" cant be too bad... |
|
| Author: | drmini in aust [ Thu Aug 11, 2005 6:42 am ] |
| Post subject: | |
Stuwey_LS wrote: I gots me a new 286S(scatter) kent in my new motor. very nice, lots of midrange, but no huge lump at idle. How does this compare to the RE13? Vizard described the 286S as "The ultimate fast road cam" cant be too bad...
Don't forget he wrote that 25? years ago.. There's been better cams ground since, IMO.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|