ausmini
https://www.ausmini.com/forums/

another parts supplier option
https://www.ausmini.com/forums/viewtopic.php?f=2&t=99955		 Page 1 of 2
Author:  TK [ Sun May 03, 2020 1:34 pm ]
Post subject:  another parts supplier option
Love the ball joints.

classicminisjapan.com
Author:  pdpsing [ Sun May 03, 2020 1:37 pm ]
Post subject:  Re: another parts supplier option
They do a very interesting 2 part bulkhead seal, although not cheap

Sent from my SM-A305YN using Tapatalk
Author:  fuzzy-hair-man [ Sun May 03, 2020 3:21 pm ]
Post subject:  Re: another parts supplier option
Nice, thanks for sharing those ball joints could be worth looking at, especially for a car that gets driven lots.
Author:  TK [ Sun May 03, 2020 4:44 pm ]
Post subject:  Re: another parts supplier option
Yeah I'd rather drive my mini than work on it
Author:  mattywood [ Mon May 18, 2020 8:03 am ]
Post subject:  Re: another parts supplier option
Anyone fitted the bulkhead cover?


Sent from my iPhone using Tapatalk
Author:  pdpsing [ Mon May 18, 2020 8:08 am ]
Post subject:  Re: another parts supplier option
I've seen it done on a you tube video and it looks to be a quality unit, easy to fit

Sent from my SM-A305YN using Tapatalk
Author:  mattywood [ Mon May 18, 2020 8:53 am ]
Post subject:  Re: another parts supplier option
Anyone fitted the bulkhead cover?


Sent from my iPhone using Tapatalk
Author:  timmy201 [ Mon May 18, 2020 9:28 am ]
Post subject:  Re: another parts supplier option
There’s an install video here

https://youtu.be/ynBgiQz7vNA
Author:  Stibbsy [ Mon May 18, 2020 10:09 am ]
Post subject:  Re: another parts supplier option
timmy201 wrote:
There’s an install video here

https://youtu.be/ynBgiQz7vNA


Can't watch him. He is a legend in his own lunch hour. Just a heads up for anybody who cares to open it up and watch. Scroll the the last three minutes and you will get what you want to find out.
Author:  clip [ Mon May 18, 2020 8:40 pm ]
Post subject:  Re: another parts supplier option
Stibbsy wrote:
timmy201 wrote:
There’s an install video here

https://youtu.be/ynBgiQz7vNA


Can't watch him. He is a legend in his own lunch hour.

He cracks me up though, I love him for his belief in himself and his genuineness.

That company has some other nice parts too!
Author:  TK [ Tue May 19, 2020 11:24 am ]
Post subject:  Re: another parts supplier option
four ball joints delivered by DHL (three days) for about $450 AUD.
Author:  winabbey [ Tue May 19, 2020 11:51 am ]
Post subject:  Re: another parts supplier option
TK wrote:
four ball joints delivered by DHL (three days) for about $450 AUD.

TK - are you installing them on a vehicle in the short term? I think we'd all like to know your reaction in terms of quality and compatibility with the original part. ;)
Author:  TK [ Tue May 19, 2020 2:07 pm ]
Post subject:  Re: another parts supplier option
It will be a while Doug before they get installed but I will report back.
Author:  Cornholio351239 [ Wed Aug 12, 2020 6:48 pm ]
Post subject:  Re: another parts supplier option
pdpsing wrote:
They do a very interesting 2 part bulkhead seal, although not cheap

Sent from my SM-A305YN using Tapatalk


This would be a fairly easy part to 3d print. I am rebuilding a 1970 mini and was wondering what to do with this hole. I'll design and print something in ABS. Just printed a blank for the heater duct on the left hand side of the bulkhead as I'll install an electric version. I'll post some pics at some point.
Author:  MINIRO [ Fri Jun 02, 2023 11:28 am ]
Post subject:  Re: another parts supplier option
TK wrote:
It will be a while Doug before they get installed but I will report back.


Is there an update on these ball joints? I am looking at them currently for my '850'
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/