| ausmini https://www.ausmini.com/forums/ |
|
| Group 4EFTE conversion - Victoria https://www.ausmini.com/forums/viewtopic.php?f=23&t=12964 |
Page 1 of 1 |
| Author: | midjet [ Tue Nov 08, 2005 4:27 pm ] |
| Post subject: | Group 4EFTE conversion - Victoria |
Hi All, I am wanting to form a small group of Victorian mini enthusiasts to undertake a group starlet to mini engine conversion; I don?t have any metal fabrication skills but have excellent family connections with both automotive trimming and painting. If this group gets organised I am anticipating design, fabrication, and engineering costs will be kept down. Please post if you are interested in joining me, or if you have information and services that could help the build. |
|
| Author: | ConstableMini [ Tue Nov 08, 2005 6:30 pm ] |
| Post subject: | |
Mate I am sort of interested, Couple of q's, 
Clubbie or Roundy Subframe made by company or Self Engineers (quotes) Which company for conversion ( Castlemaine RodShop haven't done one and charge by the hour). 
Which engine importer are u using ? When are you planning on starting ? CM. 
|
|
| Author: | sweep77 [ Tue Nov 08, 2005 10:44 pm ] |
| Post subject: | |
where in vic are you? if your in melb i'd be interested. |
|
| Author: | h0nk [ Wed Nov 09, 2005 6:20 am ] |
| Post subject: | |
why don;t any of you victorians put your location in your profile? |
|
| Author: | ausminis4u [ Wed Nov 09, 2005 9:26 am ] |
| Post subject: | |
h0nk wrote: why don;t any of you victorians put your location in your profile? they are embarassed 
|
|
| Author: | midjet [ Wed Nov 09, 2005 9:40 am ] |
| Post subject: | |
sweep77: I am in Mlbourne ConstableMini: Car of choice will be a clubbie (roundie would be too much trouble) Subframe builder, engineer, and engine importer will be chosen by the group. Starting date will also be worked out after decisions on the above are made. ausminis4u: I am a Victorian and proud of it
|
|
| Author: | PEDDRO [ Wed Nov 09, 2005 11:32 am ] |
| Post subject: | |
Melbourne's a BIG place midget....you can still live in Melbourne and be two hours away from me. Unless, of course, you truly are in "Melbourne"....in the CBD! |
|
| Author: | midjet [ Wed Nov 09, 2005 1:05 pm ] |
| Post subject: | |
Hi Peddro, I live about 15 minutes north of the CBD and work in South Melbourne. This forum is also open to people who would like to offer their paid services for help in completing the project. |
|
| Author: | dove grey 64 [ Mon Nov 21, 2005 6:43 pm ] |
| Post subject: | |
yeah i could be interested in it aswell.. im just 15 mins from cbd..elwood. i have metal fabrication skills and a equiped workshop, but we are really busy right now. ive been keen on the conversion for a while just waiting for the right time. i can also do upholstery, i did the interior for my car and others. at work we have pipe benders and every type of welding machines you could imagine. we also have engineers at work, trouble is we are in the busy season so i havnt had time to much around with the mini but ill help out any way i can |
|
| Author: | ojmini [ Fri Jan 13, 2006 10:39 am ] |
| Post subject: | |
Hi everyone, I'm also interested, because I had that engine for 1/2 yr already but I couldn't find any can fabricate a subframe and also an engineer willing to take this project. I was thinking to send it to Mr.Enforcer. I'm from Doncaster, Melbourne |
|
| Author: | ojmini [ Fri Jan 13, 2006 10:41 am ] |
| Post subject: | |
I forgot to mention that my shell is a roundi. |
|
| Author: | noody [ Sat Mar 18, 2006 11:07 pm ] |
| Post subject: | |
Hey guys has this died in the arse or is it still looking like a goer. I would like to also do the conversion with a roundy so if its still alive can somebody PM me Thanks |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|