ausmini https://www.ausmini.com/forums/ |
|
4efte hits 380hp@wheels on 21psi https://www.ausmini.com/forums/viewtopic.php?f=23&t=13765 |
Page 1 of 1 |
Author: | 13secmini [ Tue Dec 06, 2005 2:30 pm ] |
Post subject: | 4efte hits 380hp@wheels on 21psi |
Its in an australian starlet, but just goes to show what can be done with these engines. Its still 1330cc ![]() 230hp @ 10psi 300hp @ 16psi 380hp@ 21psi Info here: http://www.austarletclub.com/forums/ind ... topic=2739 |
Author: | JC [ Tue Dec 06, 2005 3:21 pm ] |
Post subject: | Re: 4efte hits 380hp@wheels on 21psi |
13secmini wrote: Its in an australian starlet, but just goes to show what can be done with these engines. Its still 1330cc
![]() 230hp @ 10psi 300hp @ 16psi 380hp@ 21psi Info here: http://www.austarletclub.com/forums/ind ... topic=2739 Brad, Was speaking with Chris a little while ago on MSN. He was 'hoping' for 300 atw. JC |
Author: | 13secmini [ Tue Dec 06, 2005 4:18 pm ] |
Post subject: | |
wow was only hoping for 300,,, he is so close to 400 now, little shot of go go gas will get him over that easy. Must have close to 480hp@fly i think, for the school kids thats 358 KW from a 1.3L ![]() |
Author: | JC [ Tue Dec 06, 2005 4:21 pm ] |
Post subject: | |
It would be interesting to see how it behaves...... |
Author: | NoMoreMinis [ Tue Dec 06, 2005 4:29 pm ] |
Post subject: | |
I thought that his 100hp ATW without the turbo spooling was impressive too......shows how much better he has made the engine breathe with all the head work/cams etc..... It will certainly be a handfull ![]() Jeremy |
Author: | Baracade [ Tue Dec 06, 2005 11:20 pm ] |
Post subject: | |
Hmmm he has spent huge $$$ & Time to get to that figure.. I think that figure is well deserved |
Author: | gzeVan [ Wed Dec 07, 2005 12:07 pm ] |
Post subject: | |
this wouldnt be a black one with a body kit |
Author: | MrBob [ Wed Dec 07, 2005 12:31 pm ] |
Post subject: | |
Methinks he may need to aquaint himself with our old friend TORQUE STEER ![]() ![]() |
Author: | Moke of Death [ Wed Dec 07, 2005 1:22 pm ] |
Post subject: | |
MMmmm.....torque donuts........ |
Author: | NoMoreMinis [ Wed Dec 07, 2005 6:01 pm ] |
Post subject: | |
It's silver, and standard body-wise ![]() |
Author: | JC [ Wed Dec 07, 2005 6:46 pm ] |
Post subject: | |
And lives in Two Head Town. For the non-Brisbanites that's Toowoomba |
Author: | Archangel007 [ Wed Dec 07, 2005 7:37 pm ] |
Post subject: | |
Ahhh JC, you crack me up......... ![]() |
Author: | drmini in aust [ Wed Dec 07, 2005 8:29 pm ] |
Post subject: | |
NoMoreMinis wrote: It's silver, and standard body-wise
![]() Sleeper, heh. I looooooove sleepers. ![]() |
Author: | NoMoreMinis [ Thu Dec 08, 2005 6:12 am ] |
Post subject: | |
here's the dyno sheet for those that are interested.....third gear by the way..... ![]() |
Author: | gzeVan [ Thu Dec 08, 2005 8:13 am ] |
Post subject: | |
had a customer bring in a black one ,west sydney he was aiming for that sort of bhp when i saw it he was still running the newly built motor in |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |