| ausmini https://www.ausmini.com/forums/ |
|
| Quick Subframe Measurement needed https://www.ausmini.com/forums/viewtopic.php?f=23&t=16833 |
Page 1 of 1 |
| Author: | miniboy1962 [ Sat Mar 04, 2006 2:32 pm ] |
| Post subject: | Quick Subframe Measurement needed |
Hey guys, decided to build own jig but foolishly have cut my subframe to pieces  . I need to know the distance between the bolt holes at top of the towers and the very front mounting points.
ie if you have two parallel lines, one going from one strut hole on one side to the other on the other side and the second line along the front plate, what is that distance. Also the distance from the centre of front mount holes to top of the tower. Thanks. Daniel |
|
| Author: | JC [ Sat Mar 04, 2006 11:22 pm ] |
| Post subject: | |
My advice would be to borrow a subframe, and hope to heck its the same as yours. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|