Breather from the two tanks is going to the top one.
Bottom one is main line to engine.
Of the other two inlets does it matter which is the inlet from the pre pump and the inlet from the return line?
| ausmini https://www.ausmini.com/forums/ |
|
| The tangled web we weave https://www.ausmini.com/forums/viewtopic.php?f=23&t=17780 |
Page 1 of 1 |
| Author: | JC [ Sat Apr 01, 2006 8:18 pm ] |
| Post subject: | The tangled web we weave |
|
Breather from the two tanks is going to the top one. Bottom one is main line to engine. Of the other two inlets does it matter which is the inlet from the pre pump and the inlet from the return line? |
|
| Author: | manofaus [ Sat Apr 01, 2006 8:25 pm ] |
| Post subject: | |
I would put the pre pump at the top, so that if any air makes its way into the prepump, it is further away from the outlet to the pressure pump..... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|