ausmini
https://www.ausmini.com/forums/

TASSIE 4EFTE ROUND NOSE CONVERSION & NEW PAINT JOB
https://www.ausmini.com/forums/viewtopic.php?f=23&t=31148		 Page 1 of 6
Author:  tasmini [ Thu Apr 26, 2007 7:41 pm ]
Post subject:  TASSIE 4EFTE ROUND NOSE CONVERSION & NEW PAINT JOB
Well!! I finally have my engine!! I was trying very hard to get a good deal from victoria & have it sent here but....

I found one in tassie!!! :-) cost me $850 for the half cut & now I can finally get everything happening! I have also decided that seing I am going to all this effort, I am going to do it from ground up!! the body is getting refurbished & painted properly this time!! :-)

sub frame is ready to have all the work done to it this weekend!

Link below will take you to pictures (cant figgure out how to f#*ken upload them!)

http://au.pg.photos.yahoo.com/ph/mini_c ... /my_photos

Its going to be a lot of stress I reckon!! haha but me & my mates are keen & ready to go!! so for all you out there who have done this already be warned!!

YOUR BRAIN WILL PICKED!!!! :wink:

I will try & update progress as much as I can with pics & tips!!
Author:  DRB33N [ Thu Apr 26, 2007 7:44 pm ]
Post subject: 
We would love to see progress PICs !
Author:  -=MiniMafia=- [ Thu Apr 26, 2007 7:45 pm ]
Post subject: 
he will probs drop the camera..... :D

good luck mate! let me know if you need any help.
Author:  tasmini [ Thu Apr 26, 2007 7:52 pm ]
Post subject: 
im trying to figgure how to insert the F*#ken Pictures! LoL!!

how do you do it?
Author:  drmini in aust [ Thu Apr 26, 2007 7:56 pm ]
Post subject: 
http://www.ausmini.com/forums/viewtopic.php?t=10405
:wink:
Author:  -=MiniMafia=- [ Thu Apr 26, 2007 8:28 pm ]
Post subject: 
send em to me, ill host em. or make a photo bucket accound.

**edit, dr mini beat me to it
Author:  tasmini [ Fri Apr 27, 2007 6:03 pm ]
Post subject: 
all good,

added the link in the first post!

Hey josh when do you reckon I could get that subframe?

need to be able to move the car around still whilst building one
Author:  -=MiniMafia=- [ Fri Apr 27, 2007 10:37 pm ]
Post subject: 
aim for this weekend, you can pick up your timing belt also. have you been able to pull my brakes off yet? i couldnt find a socket big enough!
Author:  tasmini [ Sun Apr 29, 2007 8:47 am ]
Post subject: 
not much to say as yet,

Just have some pics of what we did yesterday

Image

Image


does anyone now what I can do about the oil Filter? (wont fit)[/code]
Author:  BLACKRZ_667 [ Wed May 02, 2007 11:47 pm ]
Post subject: 
Is that my old engine??
Author:  Archangel007 [ Thu May 03, 2007 6:21 am ]
Post subject: 
The links:

http://f3.yahoofs.com/users/421effacz904d58df/4870scd/__sr_/e58fscd.jpg?phQU9MGBszeo9ncj

http://f3.yahoofs.com/users/421effacz904d58df/4870scd/__sr_/a896scd.jpg?phQU9MGBlaPidasd

Cheers,
Tricky
Author:  tasmini [ Fri May 04, 2007 9:05 pm ]
Post subject: 
your old motor?

who knows

I bought it off Josh in Richmond did he get it off you?
Author:  -=MiniMafia=- [ Fri May 04, 2007 10:38 pm ]
Post subject: 
yeah, got it off sam. took funking ages to get it on the back of the trailor, LOL.

dude, i got your timing belt here, and sam havnt got you know what yet....
Author:  tasmini [ Sat May 05, 2007 9:34 am ]
Post subject: 
Hi Josh,

do you have the subframe by any chance?

if so I can come get both the subframe & timing Belt this weekend if you like,
Author:  tasmini [ Sat May 05, 2007 7:51 pm ]
Post subject: 
Ok!!! lets se If I can do it properly this time!!, I have a few progress pics so lets see if I can upload them,

something that is bothering me though, the ingine seems to be tilted back a bit, its not sitting upright.... its probably me just being fussy though,

now that the sub frame is done, I can get the body sent off to get all the rust fixed!!

Image

Image

Image

Image

Image





[/img]http://i200.photobucket.com/albums/aa267/mini_commodore/100_3547.jpg[img]

[/img]http://i200.photobucket.com/albums/aa267/mini_commodore/100_3527.jpg[img]

[/img]http://i200.photobucket.com/albums/aa267/mini_commodore/100_3550.jpg
Page 1 of 6 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/