ausmini
https://www.ausmini.com/forums/

Im thinking about installing one of these
https://www.ausmini.com/forums/viewtopic.php?f=23&t=32879		 Page 1 of 1
Author:  gzeVan [ Fri Jun 15, 2007 8:42 am ]
Post subject:  Im thinking about installing one of these
what do you guys think its either this or a F6a/K6a

also this one will cost me far less from a mates wrecking yard

Image
its a cg13de
Author:  cush [ Fri Jun 15, 2007 8:46 am ]
Post subject: 
the nissan march engine?

58 kW... not bad...:)

a fairly recent make too..
Author:  bnicho [ Fri Jun 15, 2007 12:45 pm ]
Post subject: 
It's a swap I've considered for a while. Compact litlle 1275cc motor and there is a 930cc supercharged and turbo variant available too.
Author:  13secmini [ Fri Jun 15, 2007 5:44 pm ]
Post subject: 
yeh they seem to be a tuff little motor. I have not had a chance to measure one up but the pics i've seen over the net they look pretty compact. Put a nice turbo combo on it and i can see it matching a 4efte. Looks like a mini sr20 with that head too haha.
Author:  gzeVan [ Fri Jun 15, 2007 6:26 pm ]
Post subject: 
If there is room i will turbo it, your right brad it does look like a baby sr it even has chain driven camshafts under that cover
Author:  bnicho [ Fri Jun 15, 2007 6:57 pm ]
Post subject: 
There's a mostly complete Micra with minor front end damage in the local wreckers. It's been temping me for months. :lol:
Author:  gzeVan [ Fri Jun 15, 2007 8:40 pm ]
Post subject: 
hey brett, they seem like a decent swap but i havent seen a gearbox yet as this ones an auto

upside: :D its all alloy, quite a compact head width and the water pump is close to the block

Down side: :cry: the oil filter is at the back of the block (firewall side)

does anyone know if they are rod or cable shift + hyrdo or cable clutch
Author:  bnicho [ Fri Jun 15, 2007 8:58 pm ]
Post subject: 
gzeVan wrote:
hey brett, they seem like a decent swap but i havent seen a gearbox yet as this ones an auto

upside: :D its all alloy, quite a compact head width and the water pump is close to the block

Down side: :cry: the oil filter is at the back of the block (firewall side)

does anyone know if they are rod or cable shift + hyrdo or cable clutch


The one in the local yard is on top of another car. I can go and check out the gear linkage and clutch if you like.

Remote mounting the oil filter may be an option.

Cheers,

Cheers,
Author:  miniboy1962 [ Sat Jun 16, 2007 3:24 am ]
Post subject: 
What does it matter that the oil filter is on the other side? Doesn't tjat mean that it can be hidden along with the starter motor, surely the oil filter wont poke out that much....
Author:  gzeVan [ Sat Jun 16, 2007 10:02 am ]
Post subject: 
it would be a pain in the bum to change
Author:  cush [ Sat Jun 16, 2007 10:10 am ]
Post subject: 
13secmini wrote:
Looks like a mini sr20 with that head too haha.


i thought that, too :P
Author:  gzeVan [ Tue Jun 19, 2007 7:25 pm ]
Post subject: 
we tried a n12 pulsar gearbox today and would you belive it fits :o and its very small but was run behind motors up to 1.6 so it should be strong , he also had 4 in stock so they seem very common and cheap 8)

also a n16 flywheel fitted too 8) isnt it cool when everything is interchangable

the whole engine and box measured up at 74cm long which will fit nice

cheers Paul
Author:  cush [ Tue Jun 19, 2007 9:28 pm ]
Post subject: 
nissan were good at that...

so how much was the gearbox?
Author:  gzeVan [ Tue Jun 19, 2007 10:45 pm ]
Post subject: 
Quote:
so how much was the gearbox?


$150
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/