In short, yes the motor can fit. A front mount radiator and intercooler, however, might not.
There's a very nice green 850 Mini owned by a member on here who might be able to give you some more info. I'm sure he'll see this thread and pipe up.
| ausmini https://www.ausmini.com/forums/ |
|
| nose jobs - 4efte https://www.ausmini.com/forums/viewtopic.php?f=23&t=38221 |
Page 1 of 1 |
| Author: | newboy [ Mon Nov 26, 2007 10:01 pm ] |
| Post subject: | nose jobs - 4efte |
Hi All, Very new to the mini scene so sorry for any dump questions i ask. More into the hotrods and have just finished putting a lexus/toyota (1UZ v8) in a rod. With that on the road a new project had to be found. So what better then a mini! Been reading this site for a few months now. Awesome - so much info!! Just bought my new project, one very rusty 77 mini. Someone has done a nose job on it (as round's stoped in OZ start of 70s????). Anyway, my question is since it has had a round nose front put on will a 4EFTE still fit? mick |
|
| Author: | slinkey inc [ Mon Nov 26, 2007 10:30 pm ] |
| Post subject: | |
In short, yes the motor can fit. A front mount radiator and intercooler, however, might not. There's a very nice green 850 Mini owned by a member on here who might be able to give you some more info. I'm sure he'll see this thread and pipe up.
|
|
| Author: | Archangel007 [ Tue Nov 27, 2007 7:08 am ] |
| Post subject: | |
Welcome to Ausmini forum Mick. As per Slinks reply, yes, there are quite a few 4EFTE done both here and in NZ. Dont forget to ask questions if you need to. Cheers, Tricky |
|
| Author: | minimetoy [ Tue Nov 27, 2007 12:26 pm ] |
| Post subject: | |
Quote: There's a very nice green 850 Mini owned by a member on here who might be able to give you some more info. I'm sure he'll see this thread and pipe up.
That's me. I real busy at the moment (have not been posting lately) but am always happy to help. Welcome aboard. Dan |
|
| Author: | cush [ Tue Nov 27, 2007 12:33 pm ] |
| Post subject: | |
slinkey inc wrote: very nice green 850 Mini
quoted and bolded for truth.. |
|
| Author: | newboy [ Tue Nov 27, 2007 6:27 pm ] |
| Post subject: | |
Thanks guys. I have alot of rust to cut out, so once that is done i'll start on shoe horning a 4efte into it. Until then i'll keep reading and learning. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|