| ausmini https://www.ausmini.com/forums/ |
|
| bathurst project https://www.ausmini.com/forums/viewtopic.php?f=23&t=50876 |
Page 1 of 1 |
| Author: | muleboy [ Wed Mar 04, 2009 2:43 pm ] |
| Post subject: | bathurst project |
hi, im looking at doing a suzuki transplant into a mini but i have no idea where to start. does anyone know any enthusiasts in Bathurst that i could talk to so i know what im getting myself into |
|
| Author: | moemoke [ Thu Mar 05, 2009 12:30 pm ] |
| Post subject: | |
1, find a good engineer 2, find a good bank manager 3, contact Archangle re subframe manufacture 4, find motor GTI, I presume Then you will need good brakes (4 spots most likely), custom driveshafts, wiring sorted, fuel system sorted, instruments. Mix together with a Mini (or a Moke  ) and enjoy
So lots of time and / or lots of money (if you pay someone to do it for you) I'm part way through a GTI conversion into a Moke but too many other projects as well. |
|
| Author: | Kennomini [ Thu Mar 05, 2009 7:32 pm ] |
| Post subject: | |
Look out for a half cut at local and near by wreckers or even an entire car that way you get everything you will need from the doner car, and contact an engineer or two. |
|
| Author: | EST-071 [ Thu Mar 05, 2009 8:14 pm ] |
| Post subject: | |
Would be less trouble to buy one all ready done. Like this one Ebay Cheers Pete |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|