| ausmini https://www.ausmini.com/forums/ |
|
| Honda Vtec Kit from Victoria https://www.ausmini.com/forums/viewtopic.php?f=23&t=70703 |
Page 1 of 1 |
| Author: | markmoddy [ Sat May 14, 2011 12:49 pm ] |
| Post subject: | Honda Vtec Kit from Victoria |
Hello I am chasing the name and contact details for the company in Victoria that produces the kit for the Honda Vtec conversion. Thanks Mark |
|
| Author: | _666_ [ Sun May 15, 2011 4:28 am ] |
| Post subject: | |
no one in australia does them.. you will need to import one.. |
|
| Author: | zulu_warrior1976 [ Sat Sep 24, 2011 11:09 pm ] |
| Post subject: | |
Yep, 666 is 100% correct |
|
| Author: | zulu_warrior1976 [ Wed Sep 28, 2011 10:00 am ] |
| Post subject: | |
Mini and Moke World will build one for you... The have made one for a race car and have said it would be legal for road use... In SA though, it is a complete ball breaker trying to get a B16a2 through engineering... more from a suspension modification perspective than anything else. Can be done but is very expensive... I have looked into it in detail as I was extremely keen to do a vtec conversion on a clubby... but, budget was a factor and everything pointed to an extremely expensive build. With this in mind I am planning on going with a pimped up A series instead... plenty of power and not as many legal hoops to jump through. |
|
| Author: | zulu_warrior1976 [ Wed Sep 28, 2011 10:02 am ] |
| Post subject: | |
from what's been said on here, the vtec mini subframe from the US is too wide... I have heard the allspeed frame from the UK is ok. Money is the key though. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|