ausmini
https://www.ausmini.com/forums/

Micra Turbo?
https://www.ausmini.com/forums/viewtopic.php?f=23&t=8936		 Page 1 of 2
Author:  drmini in aust [ Sat Jul 09, 2005 10:25 pm ]
Post subject:  Micra Turbo?
How big are these things.. might fit??
Image
Author:  9YaTaH [ Sat Jul 09, 2005 10:35 pm ]
Post subject:  Room to Spare
Yeah...imagine the extra room to work on her with the battery in the boot :D
Author:  minstar [ Sat Jul 09, 2005 10:55 pm ]
Post subject: 
Actually that's another good choice Doc? Pity you can't just whip down to your local wrecker and pick one up (unless you live in japan!). Still I guess you could measure up the Australian variant?
Author:  drmini in aust [ Sun Jul 10, 2005 7:07 am ]
Post subject: 
Hey I pulled this pic off a Micra site in Melbourne so there must be some about. Or aftermarket kits.. :wink:
Author:  13secmini [ Sun Jul 10, 2005 1:01 pm ]
Post subject: 
There is plenty of info and pictures of these nissan micra motors here:
http://www.micra.com.au/

The engine code is CG13DE: DOHC 16valve 1275cc 4 cylinder

They make 55kw standard. Can handle 6psi without intercooling. There is one in sydney with a t25 ball bearing turbo with intercooler on standard engine made 90kw@wheels.

Bolt on turbo kit available in US here: http://www.sfxperformance.com/parts/TUSNM2001S.htm

Anyones sister have one we can measure up?
Author:  Stuartminidlx [ Sun Jul 10, 2005 6:02 pm ]
Post subject: 
i saw one of these in a mag with a SR20DE mid mount RWD was very cool. would be handy with the micra engine you wont even need to change the badge.
Author:  bnicho [ Sun Jul 10, 2005 9:56 pm ]
Post subject: 
There was a Micra/March Super-Turbo available in Japan. 930cc Four cylinder with a supercharger AND a turbo charger!!

Local model looks like the swap is possible, very compact motor.
Author:  IwannaMini [ Wed Jul 13, 2005 11:00 pm ]
Post subject: 
http://www.rsportscars.com/eng/cars/micra_r.asp

Now THIS is an engine..!!!
Author:  Mini Mad [ Thu Jul 14, 2005 2:28 am ]
Post subject: 
Mid engined too...nice..
Author:  SnoBall [ Thu Jul 14, 2005 7:56 pm ]
Post subject: 
The micras had a Micra "S" which was a larger motor with about 75kw i think. eats taxis :twisted:
Author:  SlammedPV [ Thu Sep 15, 2005 1:22 pm ]
Post subject: 
I have seen the cg13de dummy fitted in a clubman mini and no cutting was required for it to fit. PIstons auto in baywater is the guy doing it and plans to do a drive in drive out conversion. I went and good a price for engine and gearbox at a jap wreckers in footscray and the it is $1300 engine and gearbox. nice price :D
Author:  poeee [ Thu Sep 15, 2005 1:27 pm ]
Post subject: 
SlammedPV wrote:
I have seen the cg13de dummy fitted in a clubman mini and no cutting was required for it to fit. PIstons auto in baywater is the guy doing it and plans to do a drive in drive out conversion. I went and good a price for engine and gearbox at a jap wreckers in footscray and the it is $1300 engine and gearbox. nice price :D


Any ideas on what the drive in drive out would be?
Author:  SlammedPV [ Sat Sep 17, 2005 7:12 pm ]
Post subject: 
i Asked about price at the start of 2004 and i think he was aiming for around $6000.

On one of the micra sites a dude stated he got 88kW out of the engine with no internal mods. Just a good exhaust, air intake and something bout tricking the computer into giving the motor more fuel. Then he said he could just beat SSS pulsars and that was in a micra.
supposedly these engines are better than the swift engines just detuned for a shopping car.
Also you can get the March super turbo motor for $1000 but the dude said you had to be brave coz if it breaks, parts are impossible to get.
Author:  stephenianjames [ Sun Sep 18, 2005 6:17 pm ]
Post subject: 
I'm pretty sure Pistons aren't doing the Micra conversions now. I enquired a couple of months ago and I was told that they sold their prototype, but they may be doing them again.
Author:  manofaus [ Sun Sep 18, 2005 8:11 pm ]
Post subject: 
do you think these motors are as strong as gti motors? In driveline?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/