| ausmini https://www.ausmini.com/forums/ |
|
| Blackrz_667 Conversion (Pics page 2) https://www.ausmini.com/forums/viewtopic.php?f=23&t=9827 |
Page 1 of 4 |
| Author: | BLACKRZ_667 [ Sat Aug 06, 2005 6:52 pm ] |
| Post subject: | Blackrz_667 Conversion (Pics page 2) |
Ok just a quick up date I have found an importer to get the 1/2 cut I have found a place to get the sub frame built Still looking for disk breaks (any help on the disks would be great) Should get the 1/2 cut in the next month or 2 Sub frame built straight after that Then i guess disks lol And i will be posting pics as soon as i start 
|
|
| Author: | mini_van_1970 [ Sat Aug 06, 2005 8:42 pm ] |
| Post subject: | |
That is good what type of conversion are you doing where are you getting the subbie done and how much for it Pat |
|
| Author: | Baracade [ Sat Aug 06, 2005 9:07 pm ] |
| Post subject: | |
Bloody awesome... dam we will have alot of starlet mini's soon... YAY |
|
| Author: | BLACKRZ_667 [ Sat Aug 06, 2005 9:13 pm ] |
| Post subject: | |
Engine = Starlet GT Subframe = Wilson Automotive (what cant they do?)  price ?? as of yet about $1200 - $1500 as i said dunno
|
|
| Author: | Baracade [ Sat Aug 06, 2005 9:15 pm ] |
| Post subject: | |
what are you going to do to the motor before fitting? Forged pistons? harderned cranks? Big turbo's? Head work? Cam work? hehe NOS? tell us the secrets |
|
| Author: | BLACKRZ_667 [ Sat Aug 06, 2005 9:23 pm ] |
| Post subject: | |
well i am planing on putting a bigger turbo, Ball bearing big HUGE thing, on as of what turbo ??? and bigger intercooler 2 1/2" zorst straight off the turbo stage 3 BOV 
new pipeing ect. dunno much as of yet but soon when the balls start spinning like in BB Turbo then i will know
yeah so it should be good |
|
| Author: | minstar [ Mon Aug 08, 2005 10:18 am ] |
| Post subject: | |
Well Done RZ, the journey has started. Where are you located because having found a mob that will do a subframe you can put others in your area onto them? I finally put my engine in for the last time (no really!) this weekend so now I get to the fund stuff! 2 months and she should be running hopefully... |
|
| Author: | Icarus [ Mon Aug 08, 2005 10:48 am ] |
| Post subject: | |
Do/would either of you two share designs of your subframe? I am pretty set on doing this conversion to my mini as well (78 Clubbie), just to give the V8 guys a bit of a scare. I understand if you don't want to there is a fair bit of time/money and work gone into it. Also, apart from the Honda turbo, whay other brakes fit? I already have 12" wheels. Sorry to be a bit off topic, but has anyone on this forum purchased the engine out of the "Brownster" starlet GT? Rumor has it, it was sold to a mini owner for $12K and has some MAJOR work done on it? |
|
| Author: | min13k [ Mon Aug 08, 2005 11:11 am ] |
| Post subject: | |
the 350 bhp motor ?? if so yeah a member here owns it and is also giving it a shot of nos makka |
|
| Author: | Icarus [ Mon Aug 08, 2005 11:20 am ] |
| Post subject: | |
That sounds like it, that is going to be one scary mini once completed! Has anyone in QLD done a Starlet conversion in QLD? If you'd add me to msn ([email protected]) for a few tips on who did your subframe/work etc. that would be awesome. Thanks. |
|
| Author: | min13k [ Mon Aug 08, 2005 11:24 am ] |
| Post subject: | |
yeah one was done up there real recent like but i think it was a suzi motor makka |
|
| Author: | Baracade [ Mon Aug 08, 2005 12:33 pm ] |
| Post subject: | |
Yeah thats me I got Brownster's motor... Hopefully car might run in about two weeks... http://www.ausmini.com/forums/viewtopic.php?t=8923 |
|
| Author: | Archangel007 [ Mon Aug 08, 2005 1:30 pm ] |
| Post subject: | |
Icarus, I am halfway through the Starlet conversion. The subframe is complete and the engine is in waiting for all the ancilliaries to be mounted so the Engineer can tick off. Let me know if you want help. Andrew |
|
| Author: | poeee [ Mon Aug 08, 2005 1:31 pm ] |
| Post subject: | |
For $1200-$1500 for the frame, i'd be so loving that! Where in Vic should I go to get one made with an engineers cert... anyone know? |
|
| Author: | BLACKRZ_667 [ Tue Aug 09, 2005 6:32 pm ] |
| Post subject: | |
Bought a half cut off e-bay today  so it begins
this should be good 
im thinking of a exhaist like this I love Paint
Sorry Edited : 2 1/2" 3" tips (No Flame kit) just looked cool
|
|
| Page 1 of 4 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|