ausmini https://www.ausmini.com/forums/ |
|
Low Down on Tamiya m 05/03 https://www.ausmini.com/forums/viewtopic.php?f=28&t=85580 |
Page 34 of 36 |
Author: | simon k [ Sun Nov 15, 2015 8:33 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
I've joined the cracked chassis club... I think this happened while practising before racing last night. I raced anyway, heats were terrible as usual. I've had an ongoing problem with steering arms popping off in a crash, I changed the arms to the standard tamiya units, which also meant taking out a LOT of toe, and I started being a lot more consistent, I almost came 2nd in a race! it looks like all the silastic I put in the gaps to try to seal it up helped keep it in one piece Attachment: DSC_0024 (Medium).JPG Attachment: DSC_0025 (Medium).JPG Attachment: DSC_0026 (Medium).JPG Attachment: DSC_0027 (Medium).JPG Attachment: DSC_0028 (Medium).JPG #1 mini driver gave me a go of his car, it drives much the same, but his is a lot more direct which he reckons might be my cheapie controller... so maybe I'll see about a new one |
Author: | NT [ Sun Nov 15, 2015 8:49 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
Gotta love Mini racing! Definitely a good servo makes a big difference - and then also some expo dialed in to slow down the initial sensitivity, but without the loss of any overall steering throw. I just keep playing with my rates until it reaches the happy place. |
Author: | simon k [ Sun Nov 15, 2015 8:54 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
NT wrote: Definitely a good servo makes a big difference - and then also some expo dialed in to slow down the initial sensitivity, but without the loss of any overall steering throw. I just keep playing with my rates until it reaches the happy place. yeah, my cheapie controller doesn't have any expo, only a dial that reduces the amount of steering... is a flysky GT3-C the most cost effective? they're ~$75 on ebay, or a GT3-B is $45 at rcmart |
Author: | ryan [ Mon Nov 16, 2015 7:06 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
The GT3-c is a decent controller with lots of great functionality, but it certainly doesn't help make the car more direct. I really like my GT3c but it certainly has a cheap feel about it and quite loose steering. I upgraded to a spectrum dx4s. Another good transmitter is a Futuba 4pls. |
Author: | ryan [ Mon Nov 16, 2015 7:09 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
Hobby warehouse is where I bought my Gt3c. $68 plus shipping. Avoid the orange ones as they had issues. |
Author: | simon k [ Mon Nov 16, 2015 7:11 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
ryan wrote: Another good transmitter is a Futuba 4pls. yeah, not interested in spending anywhere near that sort of money... half that is still too much for me ryan wrote: Hobby warehouse is where I bought my Gt3c. $68 plus shipping. Avoid the orange ones as they had issues. okie dokie |
Author: | ryan [ Mon Nov 16, 2015 7:16 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
Have you considered second hand transmitters? They pop up all the time on RCTECH and you can save $100s |
Author: | simon k [ Mon Nov 16, 2015 7:22 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
ryan wrote: Have you considered second hand transmitters? They pop up all the time on RCTECH and you can save $100s was just looking on there... |
Author: | simon k [ Mon Nov 16, 2015 7:37 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
simon k wrote: ryan wrote: Have you considered second hand transmitters? They pop up all the time on RCTECH and you can save $100s was just looking on there... DX3S for $120? http://www.rctech.net/forum/australia-s ... tires.html |
Author: | ryan [ Mon Nov 16, 2015 8:33 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
If it included post I'd grab it. |
Author: | simon k [ Mon Nov 16, 2015 9:20 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
always worth asking.... it's that or one of these, can get one delivered for about $65 plus another $14 for a second receiver http://www.ultimaterc.com/forums/showth ... p?t=217514 |
Author: | ryan [ Tue Nov 24, 2015 7:51 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
Hobby King are now stocking m-chassis sized bodies, one of which is a classic Mini Cooper. It's the short wheelbase but a different shape to the Tamiya version. They have stock in Australia and they are cheap. |
Author: | simon k [ Wed Nov 25, 2015 7:02 am ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
lol, yesterday I got a package of stuff from Banzai hobby including a new Tamiya shell - was only $20 though |
Author: | davem [ Mon Dec 28, 2015 5:59 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
righto I'm going to strip and rebuild my m05 over the next few days, just finished rebuilding 2 10th scale nitro tourers for next years racing. I'm going to race the mini socially on a carpet track at gladesville. I took the car there before and it had severe track roll issues , carpet is super high grip with traction compound on the tyres. Does anyone have a sorted setup sheet for tarmac I could use for a base setup? Or post there car details? |
Author: | NT [ Mon Dec 28, 2015 7:03 pm ] |
Post subject: | Re: Low Down on Tamiya m 05/03 |
My setup on carpet was almost exactly the same as my Tarmac. I just used M-Grips, S-Grips and kit tires. Try M's all round to start with-then balance with S's as needed. Shocks, springs etc I never adjusted! |
Page 34 of 36 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |