ausmini https://www.ausmini.com/forums/ |
|
HS6 needle and linkage info needed https://www.ausmini.com/forums/viewtopic.php?f=5&t=10724 |
Page 1 of 1 |
Author: | smac [ Fri Sep 02, 2005 10:37 am ] |
Post subject: | HS6 needle and linkage info needed |
I'm after two things: 1. Can anyone supply a close up pic of the accelerator cable linkage for a single HS6 (or HIF44 if they're the same)? I'm going to use one carb from a twin HS6 set-up. Because of the way the linkage on the twin set-up works there is nowhere to attach the cable, I'll have to make something. 2. Can anyone offer up a 'starting point' needle recommendation for the same carb on the following spec: stock (matched) inlet, LCB, 1380cc, 12G940 head 'converted' to unleaded but otherwise stock (I think - never been in there), MG metro cam. Unfortunately I don't know the CR. 3. Plan B - somebody pops up and says "hey I'll swap you my single HIF44 for your twin HS6's" Thanks in advance..... |
Author: | rampage101 [ Fri Sep 02, 2005 11:48 am ] |
Post subject: | |
2. WinSU http://www.winsu.co.uk/ |
Author: | smac [ Fri Sep 02, 2005 1:37 pm ] |
Post subject: | winSU |
Ya' I've had that for ages, but used my 10 goes at needle suggestion. Maybe I'll go install it on my workmates PC ![]() |
Author: | gafmo [ Fri Sep 02, 2005 6:57 pm ] |
Post subject: | |
Anyone got another Manifold do I can get rid of this log Does this help you by chance ![]() and ![]() |
Author: | smac [ Sat Sep 03, 2005 8:11 am ] |
Post subject: | thanks |
for that - does help. But I think I've got somebody going for option 3 ![]() |
Author: | min13k [ Sat Sep 03, 2005 10:11 am ] |
Post subject: | |
smac gimme a couple of days i'll ring my mate who wreaks pommie cars and grab one of him ![]() makka |
Author: | smac [ Sat Sep 03, 2005 3:47 pm ] |
Post subject: | makka |
What are you grabbing? A pic of an HS4 or an HIF44?! |
Author: | min13k [ Sat Sep 03, 2005 6:25 pm ] |
Post subject: | |
na i'll grab a hif 44 for ya makka |
Author: | minicranks [ Sun Sep 04, 2005 7:20 am ] |
Post subject: | |
no where is safe from you stu. gees. thought keith was gonna swap you a carb? |
Author: | smac [ Sun Sep 04, 2005 5:59 pm ] |
Post subject: | |
Yeah I'm like a virus ![]() I posted two places at the same time 'cause I wasn't getting any answers to an earlier try - now I think I have two offers of a swap. I'll email both these guys with what I have and what I want and we'll see what happens... |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |