| ausmini https://www.ausmini.com/forums/ |
|
| some help with brakes??? https://www.ausmini.com/forums/viewtopic.php?f=5&t=10767 |
Page 1 of 1 |
| Author: | vtecbrick [ Sat Sep 03, 2005 5:33 pm ] |
| Post subject: | some help with brakes??? |
hi everybody, can someone please help me with this little problem i have . i have been offered a set of disc brakes of a morris 1100 for a very good price. now, can anybody tell me if it is possible to fit these to a mini, and what modifications i will need to do (if any) to fit them???? thanks for your time. |
|
| Author: | min13k [ Sat Sep 03, 2005 6:25 pm ] |
| Post subject: | |
all i'l say is if it is over 100 forget it and i think it is herd to make them fit makka |
|
| Author: | J_A_M [ Sat Sep 03, 2005 8:35 pm ] |
| Post subject: | |
i hear this asked a lot, and I hear the same answer a lot - forget it! Hubs are taller(?) and won't fit. |
|
| Author: | gazza [ Sun Sep 04, 2005 10:53 am ] |
| Post subject: | |
it can be done but its not really worth the hassle. the one everybody seems to forget is moke discs. as long as you are going to run 12's its no problem and moke disc set ups are cheap as crap. |
|
| Author: | bnicho [ Sun Sep 04, 2005 2:12 pm ] |
| Post subject: | |
gazza wrote: it can be done but its not really worth the hassle.
the one everybody seems to forget is moke discs. as long as you are going to run 12's its no problem and moke disc set ups are cheap as crap. Moke disk setups are the same as 8.4" late Mini disks, and they are not cheap anymore! Do you have a cheap source for them? But I agree, the 1100 disk conversion, while possible, is not worth the hassles. You can't fit them under 10" rims either. You would be better off doing the Honda conversion, as it's probably less work. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|