I currently am playing with the installation of Camira brakes onto my mini.
I have the drum hubs and made a backing plate.
I bought some driving flanges, but I think they are the wrong ones.
I know that you need to use different flanges, but which ones?
The ones that I have will fit onto the drum cv's, and I now know that they are unsuitable or maybe unsuitable as the disc sits 1.7mm away from the inside of the drive flange. From all the photos that i have seen of this setup it looks like there is a spacer of 20mm. No room with the two flange tyoes that I have.
The two flanges are:
the drum flange is on the right.
What type is the one on the left and which ones do I need?
BTW they are for sale!!!!
