watya thinking Makka..considering you are selling the other one
| ausmini https://www.ausmini.com/forums/ |
|
| help needed https://www.ausmini.com/forums/viewtopic.php?f=5&t=13036 |
Page 1 of 1 |
| Author: | min13k [ Thu Nov 10, 2005 8:52 pm ] |
| Post subject: | help needed |
i'm not good at wood work and need to make a consol so if anyone in sydney is willing to help me make one i'll either give them some mdf to do there own work or do some spanner work or pass on some parts makka |
|
| Author: | ausminis4u [ Fri Nov 11, 2005 8:25 am ] |
| Post subject: | Re: help needed |
min13k wrote: i'm not good at wood work and need to make a consol so if anyone in sydney is willing to help me make one i'll either give them some mdf to do there own work or do some spanner work or pass on some parts i can help.
makka is it for the clubby? |
|
| Author: | min13k [ Fri Nov 11, 2005 7:22 pm ] |
| Post subject: | |
yeah ben i had to remove the sterio as the braket broke so i wanna mount the sterio in it and maybe the oil and temp gauges makka |
|
| Author: | gafmo [ Fri Nov 11, 2005 7:28 pm ] |
| Post subject: | |
watya thinking Makka..considering you are selling the other one
|
|
| Author: | min13k [ Fri Nov 11, 2005 7:31 pm ] |
| Post subject: | |
nat the wood dash in the clubby is stayin but cos the webber box is right behind were the dash is no room fer a radio makka |
|
| Author: | DJG-14U [ Mon Nov 14, 2005 12:32 pm ] |
| Post subject: | |
Makka if you still need help let me know.. Coz if I can build this: http://www.djg-14u.com/images/models/my_p40e-01.jpg I can help ya build a console  ..
|
|
| Author: | meeni [ Mon Nov 14, 2005 4:39 pm ] |
| Post subject: | |
makka it isnt really that hard, i made mine in an afternoon with no plans and limited materials, still looks good! |
|
| Author: | clubby123 [ Mon Nov 14, 2005 7:55 pm ] |
| Post subject: | |
i know its minifinity but its good trust me have a peep 
http://www.minifinity.com/modules.php?o ... re_console |
|
| Author: | speedy [ Mon Nov 14, 2005 8:23 pm ] |
| Post subject: | |
min13k wrote: i wanna mount the sterio in it and maybe the oil and temp gauges
makka I've found the following gauge useful for Sydney traffic. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
