| ausmini https://www.ausmini.com/forums/ |
|
| What cam is it anyway? https://www.ausmini.com/forums/viewtopic.php?f=5&t=13686 |
Page 1 of 1 |
| Author: | Anto [ Sat Dec 03, 2005 5:07 pm ] |
| Post subject: | What cam is it anyway? |
Hi everyone, I have been stripping a 1098 short motor today. I haven't taken the cam out yet but the number on the end is 621. Anybody identify it? I'm thinking it is a Camtech since I have another cam that is a 620 that is supposedly by Camtech. Anybody know the specs on the 621, I would like to know which out of the two is better. Anto. |
|
| Author: | drmini in aust [ Sat Dec 03, 2005 8:39 pm ] |
| Post subject: | |
Camtech 621: 25/56-65/20 timing in/ex. duration 261* inlet, 265* exhaust. cam lift at lobe .264/.266" LCA 108* running clearance .015" Camtech comments: "Fair idle,good bottom end and midrange power, designed for engines with limited modifications. Min C/R 9:1." My verdict? Pretty tame. We run a Camtech 631 in Daytona the 1132 Clubby, which has 272* duration and .292" cam lift. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|