But its a general question... Not a Modification process... and i thought thats what a a+ was ment for/
| ausmini https://www.ausmini.com/forums/ |
|
| Quick cam question https://www.ausmini.com/forums/viewtopic.php?f=5&t=15132 |
Page 1 of 1 |
| Author: | Pin4e [ Tue Jan 17, 2006 5:44 pm ] |
| Post subject: | Quick cam question |
hi ya'll i'm buying a 1360 with 45mm weber it has a 649 cam is this a good cam? thanks josh |
|
| Author: | min13k [ Tue Jan 17, 2006 5:46 pm ] |
| Post subject: | |
josh this is a question that should be in A A+ area not in mini chat thread makka |
|
| Author: | GT1360 [ Tue Jan 17, 2006 5:49 pm ] |
| Post subject: | |
| But its a general question... Not a Modification process... and i thought thats what a a+ was ment for/
|
|
| Author: | Pin4e [ Tue Jan 17, 2006 6:01 pm ] |
| Post subject: | |
sorry boys didn't mean to start a fight, but i'll finish it if i have to
|
|
| Author: | min13k [ Tue Jan 17, 2006 6:02 pm ] |
| Post subject: | |
relating to the motor makka get back in ya box cody 
|
|
| Author: | GT1360 [ Tue Jan 17, 2006 6:05 pm ] |
| Post subject: | |
min13k wrote: relating to the motor
makka get back in ya box cody pfft. here comes hitler  
|
|
| Author: | Pin4e [ Tue Jan 17, 2006 6:13 pm ] |
| Post subject: | |
thats it you pair go to yours rooms and someone tell me about the cam. |
|
| Author: | GT1360 [ Tue Jan 17, 2006 6:16 pm ] |
| Post subject: | |
But MUM 
Arrr have you done a search on the cam on the net for its profile? I know nothing about it.. |
|
| Author: | Pin4e [ Tue Jan 17, 2006 6:18 pm ] |
| Post subject: | |
search? ..... thats an interesting idea i just like posting stuff i'm lazy. |
|
| Author: | sports850 [ Tue Jan 17, 2006 6:23 pm ] |
| Post subject: | |
From memory the 649 is fairly wild , good power but you might find it a bit lumpy for low rev's work . I think it was classed as a rally cam originally . |
|
| Author: | Pin4e [ Tue Jan 17, 2006 6:30 pm ] |
| Post subject: | |
thats ok this is just my weekend toy 
|
|
| Author: | sports850 [ Tue Jan 17, 2006 6:31 pm ] |
| Post subject: | |
Go for it then .... |
|
| Author: | feralsprint [ Tue Jan 17, 2006 6:36 pm ] |
| Post subject: | |
649 is the old ST full race cam, its a great old cam in a large bore motor, power delivery is best from about 5,000-7,500 but they are alright down to about 2,500-3000 in the large motors were only really (not sure if they were really) beaten by the Kent scattercams but that is open to debate Jon |
|
| Author: | drmini in aust [ Tue Jan 17, 2006 9:39 pm ] |
| Post subject: | |
Pretty much a race only cam, unless you like waiting around up to 3500 or so for action to start...
<edit> Cam details (from Vizard...) inlet timing 50/70 exhaust timing 75/45 duration 300*/300* cam lift .315" valve lift std rockers 0.394" valve lift 1.5 rockers 0.470" LCA 102.5* 
|
|
| Author: | DarkenMini [ Tue Jan 17, 2006 10:57 pm ] |
| Post subject: | |
to change the Cam Is a engine out jobby Hey Dr. then you have to dial it Back in and Set timing Best left for When new Engine is HEre and worked on. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|