| ausmini https://www.ausmini.com/forums/ |
|
| Winsu https://www.ausmini.com/forums/viewtopic.php?f=5&t=16595 |
Page 1 of 1 |
| Author: | miniclubman [ Sat Feb 25, 2006 9:12 pm ] |
| Post subject: | Winsu |
Just thought you might like to know if you dont already that the Twin Carb version of Winsu has been released if you havent seen it check it out here. http://www.winsu.co.uk |
|
| Author: | kiwiinwgtn [ Fri Mar 03, 2006 6:12 pm ] |
| Post subject: | |
I paid the subs on winsu 1.5 some years back and have just upgraded to 2.1 for free Really good having twin carb info.. Format looks good, easy to use will try the needles in my twin su set up and see how the car preforms. Kiwiinwgtn |
|
| Author: | miniclubman [ Fri Mar 03, 2006 9:11 pm ] |
| Post subject: | Winsu |
Yes a lot different to the old version, the only thing that I found missing was if you have an existing needle and would like to know what the next one up or next one down is the option is not there it is a matter of trial and error I have spoken to Scott and he thought the option would not be required but will be putting it in the next one. Les |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|