| ausmini https://www.ausmini.com/forums/ |
|
| Gently massaging the mini curves???? https://www.ausmini.com/forums/viewtopic.php?f=5&t=19200 |
Page 1 of 1 |
| Author: | HPDesign [ Sun May 14, 2006 6:38 pm ] |
| Post subject: | Gently massaging the mini curves???? |
I was looking into bodykit's for the mini and ran into these? http://www.lambodoors.co.uk/ these UK guys have done a kit for the Rover mini's just a bit of FYI. looks like some hardcore cuttin and shuttin though just read a bit if it 
cool look though http://www.gordonz.co.uk/ have a look here to see a mini with a cool bodykit.... ever thought of 13x 10 rim's now's your chance ( you have to click on the mini to get more info) |
|
| Author: | Angusdog [ Wed May 17, 2006 5:11 pm ] |
| Post subject: | |
From the lambo doors site (to save hunting for it): 
|
|
| Author: | HPDesign [ Wed May 17, 2006 5:22 pm ] |
| Post subject: | |
thanks, for all you people who want them this kit is for the later internally hinged doors. they have no quarter windows like all AUST mini's and the doors are completey different. maybe not an easy conversion and not for an Aussie delivered mini |
|
| Author: | cbs [ Wed May 17, 2006 10:47 pm ] |
| Post subject: | |
I've seen the ad for these in one of the mini mags. They say they involve a lot of engineering prowess. As they say" it is an 11 on a scale of 1 to 10 to install these" |
|
| Author: | floss [ Tue May 23, 2006 8:52 pm ] |
| Post subject: | |
they look bloody great though... can you imagine watching the jaw drop at a safewayt when you pull up and get out of your car, let alone in front of other miniphiles. would be worth the 11 out of 10 (onless you hit your head or got stuck ) HEHE |
|
| Author: | dove grey 64 [ Tue Jun 06, 2006 3:11 pm ] |
| Post subject: | |
imagine if they could be fitted to aussie doors.......the amount of crap that would fall out of my doors.... i'd actually rather get suicide doors...but then again i'd rather have standard doors. that body kit is rude...its so bad its great. that kit, with that multi colored paint and some 13x7 chrome superlite spinners would win the "worst mini ever" in my books =) |
|
| Author: | Molina [ Tue Jun 06, 2006 4:31 pm ] |
| Post subject: | |
1970 mini K wrote: imagine if they could be fitted to aussie doors.......the amount of crap that would fall out of my doors.... i'd actually rather get suicide doors...but then again i'd rather have standard doors. that body kit is rude...its so bad its great.
that kit, with that multi colored paint and some 13x7 chrome superlite spinners would win the "worst mini ever" in my books =) True... you fabricate a bolt on suicide door kit and i'll buy it. 
Personally i hate everything about that kit pictured above, it's ugly obnoxious looking and totally kills all of the mini's strengths (lightweight, cute looking, nimble, etc). |
|
| Author: | supercharged 850 [ Wed Jun 07, 2006 1:57 am ] |
| Post subject: | |
....and the award for the "ugliest mini bodykit ever" goes to.......... P-plate Honda owners should stay away from minis. Seriously. |
|
| Author: | Gordo [ Wed Jun 07, 2006 7:18 pm ] |
| Post subject: | |
Molina wrote: True... you fabricate a bolt on suicide door kit and i'll buy it.
Now this is not as easy as it seems... |
|
| Author: | Molina [ Wed Jun 07, 2006 9:33 pm ] |
| Post subject: | |
Gordo wrote: Molina wrote: True... you fabricate a bolt on suicide door kit and i'll buy it. Now this is not as easy as it seems... Who said it was easy... but it would have to be a lot easier than just about any other car i can think of... the doors are such a simple design. |
|
| Author: | Mini Mad [ Wed Jun 07, 2006 9:53 pm ] |
| Post subject: | |
Except the B-pillar isn't really a structural point and would need ALOT of re-inforcing to hold a door.. |
|
| Author: | Gordo [ Thu Jun 08, 2006 4:57 pm ] |
| Post subject: | |
It all depends on what sort of hinge you were going to use.. Keeping in mind that the standard mini hinges just bolt stright onto the body.... 
|
|
| Author: | harvey69 [ Sat Jun 10, 2006 11:24 am ] |
| Post subject: | |
hurry up and finish gordo.... i wanto see it finished.... i hate suspense..... your machine is going to be a kiler when finished.... cheers |
|
| Author: | Gordo [ Sat Jun 10, 2006 12:12 pm ] |
| Post subject: | |
harvey69 wrote: hurry up and finish gordo.... i wanto see it finished.... i hate suspense.....
your machine is going to be a kiler when finished.... cheers You hate suspense.. Not seeing this thing finished is killing me... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|