You can use competition hydro bumpstops if you move the brake pipe round a bit and tap holes for the attachment plate.
| ausmini https://www.ausmini.com/forums/ |
|
| Bump Stops https://www.ausmini.com/forums/viewtopic.php?f=5&t=25030 |
Page 1 of 1 |
| Author: | Stuartminidlx [ Sat Nov 18, 2006 2:25 pm ] |
| Post subject: | Bump Stops |
i'm converting my car from hydro to dry and i was wondering if there is a rear bump stop. and does anyone have any pics of the rear suspension. |
|
| Author: | simon k [ Sat Nov 18, 2006 3:59 pm ] |
| Post subject: | |
no rear bump stop... but no piccy, sorry |
|
| Author: | drmini in aust [ Sat Nov 18, 2006 7:05 pm ] |
| Post subject: | |
skssgn wrote: no rear bump stop... but no piccy, sorry
On a dry car, the rear `bumps stops' are the rubber cones bottoming in the subframe. A dry frame has a bump shape there for this purpose. |
|
| Author: | mini bug [ Tue Nov 21, 2006 10:32 pm ] |
| Post subject: | |
Here is the Sracer rear bump stop kit.- http://www.sracer.com/catalog/products/spr015.htm |
|
| Author: | drmini in aust [ Wed Nov 22, 2006 5:44 am ] |
| Post subject: | |
You can use competition hydro bumpstops if you move the brake pipe round a bit and tap holes for the attachment plate.
|
|
| Author: | czerial [ Wed Nov 22, 2006 1:47 pm ] |
| Post subject: | |
is this worth doing? |
|
| Author: | Stuartminidlx [ Sun Nov 26, 2006 10:15 am ] |
| Post subject: | |
i have the brake pipe on the bottom already. but i just cable tied them up i didn't relocate the little bracket is this a must do will it cause the pipe to come lose if it is just cable tied. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|