| ausmini https://www.ausmini.com/forums/ |
|
| 1275 engine no: 12HC https://www.ausmini.com/forums/viewtopic.php?f=5&t=35620 |
Page 1 of 1 |
| Author: | meehal [ Mon Sep 10, 2007 11:51 am ] |
| Post subject: | 1275 engine no: 12HC |
Anyone seen this on ebay? I'm looking for a 1275 to rebuild, would this be any good? If not can someone recommend somewhere that would sell a fairly cheap engine / gearbox? http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=015 As far as i can tell its from a metro or something of the sort? |
|
| Author: | Anto [ Mon Sep 10, 2007 12:57 pm ] |
| Post subject: | |
I don't know about the engine number, but I suspect it is out of a 1275LS, or maybe a Moke. It has the rear facing thermostat, so it is out of an Australian car with pollution control. |
|
| Author: | hbr [ Mon Sep 10, 2007 4:43 pm ] |
| Post subject: | |
A little bit of Googleing and it appears a 12HC could be a MG Metro 1300 HLE engine - 1983 - 85 - A+ The pollution head points to this too. |
|
| Author: | Morris 1100 [ Mon Sep 10, 2007 4:48 pm ] |
| Post subject: | |
I think he has misread the engine number, he listed 12HC2UHZCC**** and the 1275LS has 12H902UH00****. So if you replace all his C's with 0's and add the missing digit between the H and the O it all adds up to a 1275LS engine. Everything looks right for a 1275LS except the twin carbs and the Australian 1100 rocker cover. Rod change box Late fuel pump Breather on timing chain cover Rear facing thermostat cover Pollution head Late alternator |
|
| Author: | simon k [ Mon Sep 10, 2007 6:24 pm ] |
| Post subject: | |
'taint an A+, has the A type distributor bracket... and A+ didn't have smog heads (out on a limb here) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|