| ausmini https://www.ausmini.com/forums/ |
|
| Roundy Fibreglass flipfront https://www.ausmini.com/forums/viewtopic.php?f=5&t=35787 |
Page 1 of 1 |
| Author: | 72clubman [ Sun Sep 16, 2007 2:59 pm ] |
| Post subject: | Roundy Fibreglass flipfront |
is there anyone in australia that sells round nose fibreglass flip fronts, and if so how much do they cost |
|
| Author: | simon k [ Sun Sep 16, 2007 5:18 pm ] |
| Post subject: | |
Brenton from A Grade Parts & Panels located one for me ($550), but I decided against it I have also seen them at Northern Mini Parts telephones are handy, call all the mini places and find one 
I have one that I am planning to use, it's rough, but if I got a tempting offer for it I might give it up |
|
| Author: | gafmo [ Sun Sep 16, 2007 6:30 pm ] |
| Post subject: | |
& why did you deside againdtrf it |
|
| Author: | simon k [ Sun Sep 16, 2007 7:13 pm ] |
| Post subject: | |
gafmo wrote: & why did you deside againdtrf it
ummmmmm...... not sure, stupidity probably, since it'll be sooo much smarter to fix the crappy one that I've got than it is to buy a nice shiny new one that just needs a bit of paint |
|
| Author: | sociallydisabled [ Wed Sep 19, 2007 7:16 pm ] |
| Post subject: | |
i have one i dont want...but im not sure what its like e.t.c it might be useless...i got it in a bunch of other parts...you are in melbourne though.. |
|
| Author: | buztoy [ Wed Sep 19, 2007 7:39 pm ] |
| Post subject: | |
hey disabled, if the bloke doesn't take it i will take it off your hands, it might be good for a plug to make a moulde,
|
|
| Author: | sociallydisabled [ Wed Sep 19, 2007 7:53 pm ] |
| Post subject: | |
id like some money obviously lol or a swap for something even. let me take some pics for ya on the weekend mate 
|
|
| Author: | mad-mk1 [ Thu Sep 20, 2007 12:15 am ] |
| Post subject: | |
I Went steel 
|
|
| Author: | dove grey 64 [ Thu Sep 20, 2007 6:52 am ] |
| Post subject: | |
Quote: I Went steel Cool
when made well, fibreglass is stronger then steel. (if i was doing one i'd use steel too) but fibreglass is cheaper and stronger and wont rust |
|
| Author: | buztoy [ Thu Sep 20, 2007 9:15 am ] |
| Post subject: | |
1970 mini K wrote: Quote: I Went steel Cool when made well, fibreglass is stronger then steel. (if i was doing one i'd use steel too) but fibreglass is cheaper and stronger and wont rust dent free too, did you want to swap $ with a new f/g or composite flip front |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|