| ausmini https://www.ausmini.com/forums/ |
|
| SC12 Custom Carby needle measurements https://www.ausmini.com/forums/viewtopic.php?f=5&t=43275 |
Page 1 of 1 |
| Author: | Ziegech [ Tue Jun 24, 2008 12:47 pm ] |
| Post subject: | SC12 Custom Carby needle measurements |
Can anyone with a 1275 sc12 set up help me with needle sizes or measurement readouts. im about to start tuning and am hoping that if i have a bunch of measurements to start with hopefully one will match up alot closer then the stock needle im so far planning on lathing back. anything will help me get closer to the mark thanks in advance for any responses |
|
| Author: | 92 [ Wed Jun 25, 2008 2:39 pm ] |
| Post subject: | |
Have a look in here http://www.ausmini.com/forums/viewtopic.php?t=26357&highlight=needle+size |
|
| Author: | Ziegech [ Thu Jun 26, 2008 1:09 pm ] |
| Post subject: | |
thanks ben ill make up a couple of those and have an experiment on the dyno and see what i can get out of her. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|