If you got the do$h, see http://www.miragemotorsport.com/
They do one.
| ausmini https://www.ausmini.com/forums/ |
|
| turbo manifold https://www.ausmini.com/forums/viewtopic.php?f=5&t=4375 |
Page 1 of 1 |
| Author: | mini_matt [ Sat Jan 29, 2005 12:14 pm ] |
| Post subject: | turbo manifold |
any heads up on where to get a turbo manifold to suitate the metro t3 over the clutch housing |
|
| Author: | poeee [ Sat Jan 29, 2005 1:05 pm ] |
| Post subject: | |
You would have to get something like that custom made, or make it yourself. |
|
| Author: | drmini in aust [ Sat Jan 29, 2005 2:44 pm ] |
| Post subject: | |
If you got the do$h, see http://www.miragemotorsport.com/ They do one.
|
|
| Author: | poeee [ Sat Jan 29, 2005 3:29 pm ] |
| Post subject: | |
drmini in aust wrote:
Hows that for a job! Mod Mini's and work on old F1's in the BOSS series! |
|
| Author: | nuclear_mini [ Sat Jan 29, 2005 7:04 pm ] |
| Post subject: | |
i have a manifold to suit a garrett t25 (i believe) turbo which mounts it over the clutch cover. I just bought it from brickworx... the only problem i think i am going to have is it was made for a clubby or moke front end, not a round nose, so clearence might be a problem.... I have it setup on another engine now, so if your interested i can send you some pics.... |
|
| Author: | brickworx [ Sat Jan 29, 2005 11:14 pm ] |
| Post subject: | |
I have one more left that puts the turbo behind the head. up high, no firewall mods needed. tight squeeze though. i had it made for mine and then went factory unit. cost me a fair bit though |
|
| Author: | nuclear_mini [ Sun Jan 30, 2005 9:53 am ] |
| Post subject: | |
interesting, would it suit the pulsar turbo though? and how would the carb sit then? How much you looking for this manifold.... I saw a manifold on this sight sometime ago and saved the pic... 
I was thinking that I could use a 3-1 set of extractors and loop a new section round to mount the turbo further forward around the engine then have a new dump pipe constructed.... the manifolds that came with the turbo are going to foul on the standard engine steadies.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|