Hi,
does anyone know if there is a listing of what rims will fit these calipers. I know that mine won't.
I had a look on the minispares site but could find a listing of which ones will...
Thanks,
| ausmini https://www.ausmini.com/forums/ |
|
| 10inch wheels to fit mini spares 4 pot calipers https://www.ausmini.com/forums/viewtopic.php?f=5&t=46019 |
Page 1 of 1 |
| Author: | Fat Boy Dave [ Mon Sep 22, 2008 10:32 am ] |
| Post subject: | 10inch wheels to fit mini spares 4 pot calipers |
Hi, does anyone know if there is a listing of what rims will fit these calipers. I know that mine won't. I had a look on the minispares site but could find a listing of which ones will...
Thanks, |
|
| Author: | smiling_simon [ Mon Sep 22, 2008 11:33 am ] |
| Post subject: | 4 pot calipers |
If these are the alloy ones, I use miniator 10x6" rims which work for me. I think 10x5.5" will fit but haven't checked. The calipers can also touch on the suspension arms depending on your setup too. |
|
| Author: | Fat Boy Dave [ Mon Sep 22, 2008 12:09 pm ] |
| Post subject: | |
Hi Rob, do you fit the 10x6" rims under your flares as I'm going to need to get a roadworthy on this one, so want to have my bases covered. 10x6 sounds pretty neat though. Thanks. |
|
| Author: | sgc [ Mon Sep 22, 2008 4:06 pm ] |
| Post subject: | |
You know this already but for the sake of completeness my 10x5" standard-offset Contessa's fit 
|
|
| Author: | Fat Boy Dave [ Mon Sep 22, 2008 7:39 pm ] |
| Post subject: | |
How goes the van project Simon? I'd love to come around and see it. |
|
| Author: | Mick [ Mon Sep 22, 2008 7:46 pm ] |
| Post subject: | |
Is it a big NO to standard steel rims over the 4pots?? |
|
| Author: | sgc [ Mon Sep 22, 2008 8:45 pm ] |
| Post subject: | |
Mick wrote: Is it a big NO to standard steel rims over the 4pots?? Affirmative, no 10" steelies admitted to the party under any circumstances. 12's may, but I haven't tried any... Fat Boy Dave wrote: How goes the van project Simon? I'd love to come around and see it.
Slowly slowly, just getting it running properly and fit for RWC at the moment. You're welcome to drop by any time, bring the family for dinner
|
|
| Author: | Davo111 [ Tue Sep 23, 2008 4:45 pm ] |
| Post subject: | 12 inch rims. |
I got a set of 12's sitting in the shed, if you want to try them and have a look, just PM me and I will dropp them around. |
|
| Author: | sgc [ Tue Sep 23, 2008 5:14 pm ] |
| Post subject: | |
Happy to submit as a test-dummy for fitting wheels over the MS 4-pot alloy calipers
|
|
| Author: | Davo111 [ Tue Sep 23, 2008 11:19 pm ] |
| Post subject: | 12inches of fun |
Just let me now when you want them, and I will bring them over or you can pop down to work in willy and pick them up, its up to you. |
|
| Author: | smiling_simon [ Wed Sep 24, 2008 3:28 pm ] |
| Post subject: | 10x6 and alloy calipers |
My 12x5 minilite rims fit easily (and don't require arch-cutting to fit) so these are a good solution for road circumstances. 10x6 will definitely need flares, I have small 1.5" flares at the moment and 3" flares at the ready. They don't appear to be too far out but that's only because of the camber i'm running =) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|