ausmini
https://www.ausmini.com/forums/

Megajolt VR sensor wiring
https://www.ausmini.com/forums/viewtopic.php?f=5&t=46400		 Page 1 of 1
Author:  92 [ Sun Oct 05, 2008 9:38 pm ]
Post subject:  Megajolt VR sensor wiring
I have a ELfalcon VR sensor for a megajolt setup just wondering which wires are which out of the sensor.
Thanks
Author:  pristic [ Mon Oct 06, 2008 9:57 pm ]
Post subject: 
Will only work one way.
I got mine mixed up - silly mistake and rushing home as I didnt tell the wife I was installing it :lol:

Ill go check for you - gimme 5 min :)

Pete
Author:  pristic [ Mon Oct 06, 2008 10:11 pm ]
Post subject: 
Hey mate, my VR has a white wire and a brown wire (or orange)

The white wire goes to the SAW and the brown to PIP
BUT I have seen VR sensors with the opposite wiring :(

Some say if you hook it up wrong you will cook something - I didnt, when mine was backwards but just so you know ok ;)

Pete
Author:  92 [ Tue Oct 07, 2008 8:19 pm ]
Post subject: 
Mine has a brown and a white wire also now I know which way around they go
Thanks :)
Author:  92 [ Fri Oct 10, 2008 7:47 pm ]
Post subject: 
Just looked at the wiring again the PIP and SAW wires are the ones from edis unit to the megajolt unit not the sensor wires. Which wire is the + out of the sensor, brown or white? any help
Author:  gr4h4m [ Thu Jan 01, 2009 12:15 am ]
Post subject: 
The brown wire was the + :lol:
Author:  gafmo [ Thu Jan 01, 2009 2:35 pm ]
Post subject: 
Graham I hope you don't mind me posting a link to one of your threads but I think its perfect for this thread and may help others out also :wink:
http://www.miniaddicts.co.uk/forum/show ... 076&page=2
Author:  gr4h4m [ Thu Jan 01, 2009 8:57 pm ]
Post subject: 
No worries mate, if anyone wants my map as a starter let me know and I can email it.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/