nozzle on the top of the Carb infront of the piston chamber is also blocked
| ausmini https://www.ausmini.com/forums/ |
|
| HIF44 idles too fast https://www.ausmini.com/forums/viewtopic.php?f=5&t=48967 |
Page 1 of 1 |
| Author: | stevethepom [ Mon Jan 05, 2009 2:41 pm ] |
| Post subject: | HIF44 idles too fast |
Hi guys new too this forum thing so here goes. I have a 998 clubby with a Hif44 and water heated MG metro manifold on it.This set up runs great but i am having a problem getting it too idle any lower than a 1000rpm , ive heard i may need to plug a idle bypass hole , does any one know which hole it is or better still have any pictures? |
|
| Author: | Ziegech [ Mon Jan 05, 2009 3:24 pm ] |
| Post subject: | |
i only just discovered the idle screw near the accelerator cable the other day sorry i dont know enough about them |
|
| Author: | gafmo [ Mon Jan 05, 2009 6:36 pm ] |
| Post subject: | |
|
nozzle on the top of the Carb infront of the piston chamber is also blocked |
|
| Author: | 1310/71 [ Mon Jan 05, 2009 9:26 pm ] |
| Post subject: | |
gafmo wrote: nottle on the top of the Carb infront of the piston chanber is blocked
"translation to aisle 5, aisle 5, translation please!" I can work out most of it, "nottle" has me baffled though. 
KB |
|
| Author: | gafmo [ Tue Jan 06, 2009 7:10 am ] |
| Post subject: | |
fizzed it, cheers Kev...ill blame not near a computer for 4 days, just the rite amount of sun and rest and to much to read on ausmini and not taking my time 
I do also have a great pic regaring to the HIF44 but can't find it at the moment, ill get back to you 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|