| ausmini https://www.ausmini.com/forums/ |
|
| Give it a good reaming https://www.ausmini.com/forums/viewtopic.php?f=5&t=4918 |
Page 1 of 1 |
| Author: | minstar [ Sun Feb 20, 2005 5:29 pm ] |
| Post subject: | Give it a good reaming |
I just bought the overhaul kit for the rear suspension arms and it says something about having to ream the outer bronze bush with service tool 18g 588 etc etc. I there a way I can do this without having to find a service tool. Cheers Matt |
|
| Author: | drmini in aust [ Sun Feb 20, 2005 6:00 pm ] |
| Post subject: | |
Not really.  If you have a 13/16" adjustable reamer, you can fit a guide bar to it and a bush to locate in the other end needle bearing.
If not properly reamed in line, the shaft won't go thru... 
If you find a Mini repair place, most have a reamer for this job. I got mine done by Mini Classic in Ermington, Sydney. 
|
|
| Author: | 9YaTaH [ Sun Feb 20, 2005 6:09 pm ] |
| Post subject: | Straight Fluted reaming....gotta love that |
Matt, PM sent...cheers, Mick |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|