| ausmini https://www.ausmini.com/forums/ |
|
| Found this,,, Ballistic will especially like this :-) https://www.ausmini.com/forums/viewtopic.php?f=5&t=51909 |
Page 1 of 1 |
| Author: | TheMiniMan [ Mon Apr 06, 2009 9:45 pm ] |
| Post subject: | Found this,,, Ballistic will especially like this :-) |
hee hee,,, i just couldn`t resist showing you all this,,, a friend of mine runs another mini forum & one of the local guys (Tilka) posted this up--> Now it`s funny to me because i have already got a few of these & i also found a few speaker box trumpets to play with too,,, so it`s wild what can actually be achieved with very little money,,, but maybe a little brains,,, anyways,,, check it out--> http://www.autospeed.com/cms/A_110771/article.html hope it helps some of you 
easy-peasy |
|
| Author: | mattsmadmini [ Mon Apr 06, 2009 9:51 pm ] |
| Post subject: | |
That is sa-weet! here i come woolies! 
|
|
| Author: | simon k [ Mon Apr 06, 2009 10:05 pm ] |
| Post subject: | |
haha - nice 
where do I find one to suit a 1.5" egg 
|
|
| Author: | TheMiniMan [ Mon Apr 06, 2009 10:38 pm ] |
| Post subject: | |
hee hee,,, i like my eggs BIG
|
|
| Author: | justfanginaround [ Mon Apr 06, 2009 11:57 pm ] |
| Post subject: | |
where do I find one for an ostrich egg ? |
|
| Author: | superSeven [ Tue Apr 07, 2009 12:25 am ] |
| Post subject: | |
eggcelent! |
|
| Author: | madmorrie [ Tue Apr 07, 2009 10:11 am ] |
| Post subject: | |
I did this ages ago, (probably when this article first came out). I got the eggcups and shaved them off as shown, then cut an alloy plate to the size for a 1.5 inch SU. I then found a long shot glass that neatly tapered from the egg cup shape down to the bore of the carb. After roughing up the stainless and alloy I bogged the whole lot together with steel impregnated fibreglass reinforced bog. It set a bit crooked but it worked. I never got around to making the second one though, so never tried it out. I think I gave it away to a friend so I'll hunt down a pic if I can. Shotglass was kind like this, you look like an idiot buying one though, trying them all with a tape measure. 
Madmorrie |
|
| Author: | Kennomini [ Wed Apr 08, 2009 8:23 pm ] |
| Post subject: | |
Do it wearing a helmet and a flaney just for a laugh
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|