ausmini https://www.ausmini.com/forums/ |
|
wanted, leyland engine bay pic https://www.ausmini.com/forums/viewtopic.php?f=5&t=52236 |
Page 1 of 1 |
Author: | redrocketrider [ Fri Apr 17, 2009 2:21 pm ] |
Post subject: | wanted, leyland engine bay pic |
Hey guys im chasing an engine bay pic, Ive got the old fashioned leyland manual but it dont really show the front of the engine, for small things coil position, horn, wiring loom,\ bit like that can people post up their leyland engine bays please |
Author: | 1310/71 [ Fri Apr 17, 2009 2:56 pm ] |
Post subject: | |
Over the last 40 yrs there could have been so many changes made to cars that would make it even more confusing. The pedr davis book "mini's downunder" (available from the Mini Experience Website) has a couple of engine bay shots from period advertising or photos. The mag itself has done a number of stories on original models and some include engine shots. If you don't have any luck here, I would try those sources. KB |
Author: | d1ck0 [ Fri Apr 17, 2009 4:28 pm ] |
Post subject: | |
Heres mine, but I don't think it will help, there's a few bits missing. ![]() ![]() Dicko |
Author: | rehab1964 [ Fri Apr 17, 2009 4:49 pm ] |
Post subject: | |
your fuel economy must be great D1cko |
Author: | slinkey inc [ Fri Apr 17, 2009 5:06 pm ] |
Post subject: | |
Brake master cylinder looks good! So it may not go too well but stopping is definitely two thumbs up there! |
Author: | d1ck0 [ Fri Apr 17, 2009 8:13 pm ] |
Post subject: | |
The next job on my list is to clean that up and see what condition it all is before I start cutting out the floors. Mind you for some strange reason I keep putting it off. You just walk up to it and get confronted with that and think "Oh Sh!t" then walk back inside. Dicko. |
Author: | floss [ Sat Apr 18, 2009 12:35 pm ] |
Post subject: | |
Hey MAte, Don't know if this helps but here you go. I have been using this pic to rmember where everything goes at the moment as well hence the arrows ![]() ![]() ![]() |
Author: | Bubbacluby [ Sat Apr 18, 2009 1:38 pm ] |
Post subject: | |
dont know if this helps. this is from my 72 GT before i dismanted it ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |