| ausmini https://www.ausmini.com/forums/ |
|
| Any good mini mechanics around in Perth?! https://www.ausmini.com/forums/viewtopic.php?f=5&t=5694 |
Page 1 of 2 |
| Author: | Mini Cooper Mania [ Sun Mar 20, 2005 10:50 pm ] |
| Post subject: | Any good mini mechanics around in Perth?! |
Any good mini mechanics around in Perth that charge cheap and do a pretty decent job, as i need to get my mini back on the road soon. |
|
| Author: | Candy [ Mon Mar 21, 2005 11:44 am ] |
| Post subject: | |
Go see Cono Onofarfo at Minicraft in Bayswater, 47 Irvine Street (93704839). Highly recommended, and his prices are reasonable. Only problem is he gets a bit busy, so you have to book in early. He does a lot of race minis and stuff as well and stocks a fair bit of parts. Cheers Ray. |
|
| Author: | miniVan [ Mon Mar 21, 2005 12:54 pm ] |
| Post subject: | |
mechanic down there knows what hes talking about.. some of them are a little full of crap when you talk about cost cutting excercises that knock them out of the loop.. theyre happy to help so long as you keep pulling out them dollar notes fair prices on most stuff.. great place to grab odd bits n peices like gaskets, knuckles and clevis pins as they always have a good repository of stock but know your prices.. they sell the tempe tyres for 400 bucks more than tempe tyres do (and tempe deliver to your door) any large items like panels.. sometimes cheaper to get straight from england.. dellorto/weber stuff.. import yourself (half the price they charge) but as i said before.. general mechanic stuff.. suspension/gaskets/service.. they are fair priced my two bobs worth Andrew |
|
| Author: | GeoffP [ Mon Mar 21, 2005 5:29 pm ] |
| Post subject: | |
I recommend Al Munday He's in Banjup. phone number's in the whitepages... 08 9414 7186 good prices, good friendly service - most helpful of any of the local mini specialists i've dealt with by a long shot knows his stuff too... was recommended to me by Lance Stannard who races one of the best of the local Appendix J historic touring cars minis Geoff |
|
| Author: | miniVan [ Mon Mar 21, 2005 5:52 pm ] |
| Post subject: | |
Banjup? thats bloody miles away |
|
| Author: | GeoffP [ Mon Mar 21, 2005 6:19 pm ] |
| Post subject: | |
miniVan wrote: Banjup? thats bloody miles away
yeah i know  and I live in Guildford - opposite ends of the earth...
its worth the drive though... more flexible for times too - saturdays sundays evenings whatever - not limited to 'shop hours' anyway its not as bad as it seems, just get to the kwinana fwy, and its about 10mins south of leach hwy... doesn't take long... i've been there and back from the city in my lunch break (1hr) with time to spare... |
|
| Author: | Candy [ Mon Mar 21, 2005 6:26 pm ] |
| Post subject: | |
cool, Banjup is just down the road for me. Must give him a call.... |
|
| Author: | minimark [ Tue Mar 22, 2005 1:35 pm ] |
| Post subject: | |
do either of these places stock second hand parts? cheers |
|
| Author: | Meck [ Tue Mar 22, 2005 1:40 pm ] |
| Post subject: | |
Minicraft stocks (some) second hand parts Also Armadale way there is Just Minis and that stocks second hand parts as well. Seeing this thread is only Perth people, should we organise a cruise sometime? |
|
| Author: | Mini Cooper Mania [ Tue Mar 22, 2005 5:29 pm ] |
| Post subject: | |
Hey guys thanks for your recommendation much appreciated!! I dont mind going for a cruise when my mini is ready 
|
|
| Author: | Mini Cooper Mania [ Tue Mar 22, 2005 5:40 pm ] |
| Post subject: | |
sorry to bother u guys again ... any idea how much it will cost to do a full respray inside out (baremetal) with 2pac paint? i've called up a few panel beater they said it would be around 2k - 5k. Is that how much they usually charge or do you guys know any cheaper place around in perth? Cheers, Ed. |
|
| Author: | Candy [ Wed Mar 23, 2005 10:05 am ] |
| Post subject: | |
Yeh, A Perth cruise would be pretty neat. Just need to gauge interest I guess? |
|
| Author: | miniVan [ Wed Mar 23, 2005 10:55 am ] |
| Post subject: | |
well i know two perth minis that are up for it.. secondly.. 2G will get you an outside only paint job that you prep.. expect 5G inside and out if they do all the work.. these prices are approximate and is for metalic 2 stage paint (metalic base clearcoat top) dont cheap out and find someone to do it for 500 bucks (i did this) 4 years later the paint was literally falling off the car and looked crap from day one.. it was shiny and black.. but crap none the less no i'm not a painter.... just had many quotes and asked lots of questions |
|
| Author: | Fez [ Thu Mar 24, 2005 9:51 pm ] |
| Post subject: | |
Ill be up for a cruize. Well when its licenced  But thats not too far away!
|
|
| Author: | FatMaserati [ Fri Mar 25, 2005 2:09 am ] |
| Post subject: | |
I am also in for a cruise. LOL! Once I get my engine rebuilt. Cono is doing it ATM. My new cam has just cleared customs, and hopefully I should get my car back next week, or the week after at the very latest. I've been without it for over a month now. I'm having withdrawls! |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|