| ausmini https://www.ausmini.com/forums/ |
|
| Honda 16v bike head? https://www.ausmini.com/forums/viewtopic.php?f=5&t=58676 |
Page 1 of 1 |
| Author: | kirby [ Wed Nov 11, 2009 5:17 pm ] |
| Post subject: | Honda 16v bike head? |
I need some advice, was looking to do the bmw twin cam conversion but the heads seem few and far between. Then I heard about a similar conversion using a Honda bike head. Can anyone provide more info on this? What kind of machining is required to the block on would an 850 or 998 be suitable? Is there a write up or build log around somewhere? |
|
| Author: | awdmoke [ Wed Nov 11, 2009 5:30 pm ] |
| Post subject: | |
Yes, there is a build log. http://118.127.11.148/~ausmini/forums/viewtopic.php?t=49117&highlight=honda+head The SEARCH function is quite handy for finding things like that. |
|
| Author: | 74snail [ Wed Nov 11, 2009 5:31 pm ] |
| Post subject: | |
PM David Rosenthal http://www.ausmini.com/forums/profile.php?mode=viewprofile&u=4156 The man is a genius and great engineer . |
|
| Author: | david rosenthal [ Thu Nov 12, 2009 2:08 am ] |
| Post subject: | |
awdmoke wrote: Yes, there is a build log.
http://118.127.11.148/~ausmini/forums/viewtopic.php?t=49117&highlight=honda+head The SEARCH function is quite handy for finding things like that. the development has come light years further than that engine. everytime I make something I always find a better/easier way of doing it and learn from my mistakes. |
|
| Author: | GT mowog [ Thu Nov 12, 2009 7:04 am ] |
| Post subject: | |
david rosenthal wrote: everytime I make something I always find a better/easier way of doing it and learn from my mistakes.
Isn't that how Research and Development is done? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|