| ausmini https://www.ausmini.com/forums/ |
|
| Starter Solenoid https://www.ausmini.com/forums/viewtopic.php?f=5&t=59070 |
Page 1 of 1 |
| Author: | kirby [ Wed Nov 25, 2009 9:27 pm ] |
| Post subject: | Starter Solenoid |
I got my mini without a starter solenoid, Does anyone have the specs so I can find a suitable replacement. Its a 63 morris 850. Not quite ready to go gemini starter just yet. |
|
| Author: | Wombat [ Wed Nov 25, 2009 9:38 pm ] |
| Post subject: | |
63 850s didn't have a starter solenoid - they had the push button on the floor near the drivers seat |
|
| Author: | jimmy_ams04 [ Wed Nov 25, 2009 9:52 pm ] |
| Post subject: | |
in saying that, most of those switches have been removed i bought an 850 not long ago that had been taken out, if there is no switch on the floor your going to have to run a high current cable back from the battery, unless one is there already, then install your solenoid, heres a link that will give you an idea on prices for eather the differnt solenoids of a floor starter 
http://www.minisport.com.au/category29_1.htm |
|
| Author: | kirby [ Wed Nov 25, 2009 11:20 pm ] |
| Post subject: | |
The mini doesn't have the original engine and has some other mods but its still an 850, will have to look for the floor starter but that would explain why the cables are so long. Thanks for the quick reply. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|