Orange dot with 136hp and 114ft lbs torque.
with an AP racing friction plate.
You should be alright.
| ausmini https://www.ausmini.com/forums/ |
|
| clutch question https://www.ausmini.com/forums/viewtopic.php?f=5&t=61142 |
Page 1 of 1 |
| Author: | Goldbrocade_62 [ Tue Feb 16, 2010 7:51 pm ] |
| Post subject: | clutch question |
On my 1275 stroker is a orange dot clutch diapham up to the job or do I go with a grey one using a gr head and either re13 or kent 286 cam |
|
| Author: | drmini in aust [ Tue Feb 16, 2010 9:04 pm ] |
| Post subject: | |
I'm running an orange dot clutch in my 1412. Cam is an RE13 with ToyoMini 1.46:1 rockers. Not in the car yet though. I expect it to be OK, as the orange dot one in my 1360 with RE282 cam (with about 10HP more power at crank) works fine. |
|
| Author: | willy [ Tue Feb 16, 2010 9:28 pm ] |
| Post subject: | |
Orange dot with 136hp and 114ft lbs torque. with an AP racing friction plate. You should be alright.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|