I just put a bracket pic up in your wanted thread.
I'll take another tomorrow with carby on, after I've dressed the weld flush.
| ausmini https://www.ausmini.com/forums/ |
|
| HS6 Carby https://www.ausmini.com/forums/viewtopic.php?f=5&t=62754 |
Page 1 of 1 |
| Author: | chazg [ Wed Apr 28, 2010 7:47 pm ] |
| Post subject: | HS6 Carby |
Does anyone have a photo of a HS6 carby showing the abutment plate and the accelerator linkages ? I have put an add in the wanted section for one but if uncussessful l will try and manufacture one myself. |
|
| Author: | drmini in aust [ Sat May 01, 2010 12:02 pm ] |
| Post subject: | |
I just put a bracket pic up in your wanted thread. I'll take another tomorrow with carby on, after I've dressed the weld flush.
|
|
| Author: | chazg [ Sat May 01, 2010 3:12 pm ] |
| Post subject: | |
Thanks for this. Much appreciated |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|