ausmini https://www.ausmini.com/forums/ |
|
different grill than everyone else? https://www.ausmini.com/forums/viewtopic.php?f=5&t=63055 |
Page 1 of 2 |
Author: | The Ranger 89 [ Thu May 13, 2010 6:58 pm ] |
Post subject: | different grill than everyone else? |
![]() i didnt have the stock grille so i bought mesh from autobarn screwed it in place bent the exess 90 degrees away from the body then unscrewed it and rotated it around and it slid strait in. i put a blue neon undeneath the bonnet and wired it in with the parkers looks good and i havent polished the engine parts yet! with the debumpeed front it looks like a lil camaro or ford escort |
Author: | Hanra [ Thu May 13, 2010 7:08 pm ] |
Post subject: | |
![]() |
Author: | EAB [ Thu May 13, 2010 7:51 pm ] |
Post subject: | |
super cool, if you don't polish the engine gear, maybe get some fly wire (finer mesh) to sit behind it and black it out a bit more. whats the legalities on having your headlights covered like that or are you going to cut them out? how does your bonnet attach? |
Author: | The Ranger 89 [ Thu May 13, 2010 7:57 pm ] |
Post subject: | |
the bar that supports the bonnet support panel is gone but the panel is still there hidden underneath the bonnet lip dont know about the legalitys but cars round my way have shade cloth over there front ends to protect the raditors from the plague of locusts here, and cops havent pulled anyone up on it, accept for covered numberplates?? |
Author: | EAB [ Thu May 13, 2010 8:12 pm ] |
Post subject: | |
The Ranger 89 wrote: the bar that supports the bonnet support panel is gone but the panel is still there hidden underneath the bonnet lip
dont know about the legalitys but cars round my way have shade cloth over there front ends to protect the raditors from the plague of locusts here, and cops havent pulled anyone up on it, accept for covered numberplates?? that said it looks great are you going to do the 3 hole down the bottom panel as well? |
Author: | Tombo [ Thu May 13, 2010 8:17 pm ] |
Post subject: | |
Is the mesh silver or black? Black would be cool in the day time ![]() |
Author: | The Ranger 89 [ Thu May 13, 2010 8:34 pm ] |
Post subject: | |
![]() its black mesh, here it is during daylight lights off |
Author: | mini_mad_matt [ Thu May 13, 2010 8:46 pm ] |
Post subject: | |
Looks nice, but about the neon light. I think it might be illegal to have a blue light like that, reserved for emergency vehicles etc. |
Author: | '77 clubby van [ Thu May 13, 2010 9:27 pm ] |
Post subject: | |
As said, I'd check the legalities, but I love it. ![]() The black with the white looks great! |
Author: | IwannaMini [ Thu May 13, 2010 9:47 pm ] |
Post subject: | |
HOLY CRAP BATMAN!!!!!!!!!! THATS AWESOME ![]() |
Author: | superSeven [ Fri May 14, 2010 12:37 am ] |
Post subject: | |
'77 clubby van wrote: As said, I'd check the legalities, but I love it.
![]() The black with the white looks great! you can buy mesh covers for 7" round headlights... and you get range rovers with protective guards on their headlights... always good to check though. |
Author: | '77 clubby van [ Fri May 14, 2010 7:06 pm ] |
Post subject: | |
Yeah I've got mesh grills on my headlights that have gone through several roadworthies, but the mesh is not hear as dense as that black mesh. ![]() |
Author: | Maxi23 [ Fri May 14, 2010 7:14 pm ] |
Post subject: | |
Very nice, I like that a lot. |
Author: | mini-dunger [ Fri May 14, 2010 11:19 pm ] |
Post subject: | |
i spose... ![]() I dont know if I love it or hate it......... gimme a sec |
Author: | Hanra [ Mon May 17, 2010 10:14 am ] |
Post subject: | |
Yeah nah I dunno ay... |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |