5portsrock wrote:
http://www.youtube.com/watch?v=8h7JtI19UaM
I want one
| ausmini https://www.ausmini.com/forums/ |
|
| New 4 speed sequential https://www.ausmini.com/forums/viewtopic.php?f=5&t=65300 |
Page 1 of 2 |
| Author: | 5portsrock [ Sat Aug 28, 2010 7:02 am ] |
| Post subject: | New 4 speed sequential |
http://www.youtube.com/watch?v=8h7JtI19UaM |
|
| Author: | 9YaTaH [ Sat Aug 28, 2010 11:24 am ] |
| Post subject: | Re: New 4 speed sequential |
5portsrock wrote: http://www.youtube.com/watch?v=8h7JtI19UaM
I want one
|
|
| Author: | graham in aus [ Sat Aug 28, 2010 12:28 pm ] |
| Post subject: | |
Wow, that is good! Wonder if it will work with the gears in the box! 
Any more info?? |
|
| Author: | Lillee [ Sun Aug 29, 2010 12:09 am ] |
| Post subject: | |
Wow that's pretty neat! |
|
| Author: | kiwiinwgtn [ Mon Aug 30, 2010 9:00 pm ] |
| Post subject: | |
Wow, thats pretty cool Have you tested in a road going car .. Are you making them for sale Kiwiiinwgtn |
|
| Author: | TheMiniMan [ Mon Aug 30, 2010 9:31 pm ] |
| Post subject: | |
is there a usable reverse gear in it ? |
|
| Author: | Lockie91 [ Mon Aug 30, 2010 9:39 pm ] |
| Post subject: | |
TheMiniMan wrote: is there a usable reverse gear in it ?
haha i dought it... |
|
| Author: | 5portsrock [ Wed Sep 08, 2010 3:12 am ] |
| Post subject: | |
Lockie91 wrote: TheMiniMan wrote: is there a usable reverse gear in it ? haha i dought it... Ok guys, a bit more detail for you. Yes it has the conventional reverse in situ. The rod change shown in the video is stock, no changes at all, with a standard lever assembly, not quickshift. Reverse is in the standard place. Flat shifting is easily achieved with the addition of a load cell such as those produced by dynojet for motorcycles. This will need to be linked to an ECU or a bespoke ignition/fuel kill device. Dove tailed dogs are not a problem provided the shift kill is set appropriately. Our thinking at this time is that an optional gear-position indicator will be incorporated as a cost option. No prices as yet but the aim is to make it competitive. This is a properly engineered piece of precision kit. Sorry to leave you hanging but work is continuing as we speak. More info soon....... |
|
| Author: | Molina [ Wed Sep 08, 2010 11:41 am ] |
| Post subject: | |
oooooooooooooooh. 
|
|
| Author: | MINIRO [ Fri Sep 10, 2010 7:58 pm ] |
| Post subject: | |
NICE!!!! |
|
| Author: | kiwiinwgtn [ Thu Oct 21, 2010 6:59 pm ] |
| Post subject: | |
any updates on this project |
|
| Author: | cush [ Thu Oct 21, 2010 8:04 pm ] |
| Post subject: | |
Oooh.... 5portsrock wrote: No prices as yet but the aim is to make it competitive.
Where's the competition? 
|
|
| Author: | 5portsrock [ Mon Nov 01, 2010 5:35 am ] |
| Post subject: | |
A slight update http://www.youtube.com/watch?v=Xjmf9TMJZG0 |
|
| Author: | cush [ Mon Nov 01, 2010 7:37 am ] |
| Post subject: | |
oooh... aaahhh... </smurf> |
|
| Author: | graham in aus [ Mon Nov 01, 2010 11:23 am ] |
| Post subject: | |
Cool! Not sure how long the carboard cover would last !
Shhhssh (Secret Squirrel!) 
Hope to buy one of these! |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|