ausmini https://www.ausmini.com/forums/ |
|
What Engine??? https://www.ausmini.com/forums/viewtopic.php?f=5&t=6598 |
Page 1 of 2 |
Author: | XR8 MOKE [ Sun Apr 24, 2005 1:47 pm ] |
Post subject: | What Engine??? |
G'day Im rebuilding a mini moke *Show Car* Up to the Engine bay and dont know what to put under the bonet... Whats a Vtec woth and installed? Who can do the conversions in Meloborne? What other options do i have? I curently have a 1293cc i was about to get rebuilt im looking at spending around $5k to $6k *Not going to race it, just want some powe to show off withr :8 ![]() cheers, Daniel |
Author: | Spaceboy [ Sun Apr 24, 2005 2:58 pm ] |
Post subject: | |
1293 sounds good ![]() |
Author: | IwannaMini [ Sun Apr 24, 2005 5:25 pm ] |
Post subject: | |
why not forget putting an engine up front and go for a rear mounted one..? There is a moke with a Toyota engine done like that. Alternatively what about a Hybusu motorbike conversion... now THAT would be mad. |
Author: | czerial [ Sun Apr 24, 2005 5:53 pm ] |
Post subject: | |
wow, now lets get back to the land of those that dont have never ending bank accounts aye ![]() ![]() dude id keep the 1293, put a supercharger kit on it from link and see how that goes ![]() |
Author: | willy [ Sun Apr 24, 2005 5:55 pm ] |
Post subject: | |
IwannaMini wrote: Alternatively what about a Hybusu motorbike conversion... now THAT would be mad. Where Hybusu = Hayabusa. ![]() ![]() |
Author: | IwannaMini [ Sun Apr 24, 2005 6:00 pm ] |
Post subject: | |
**nods** You say Potayto.. I say potarto |
Author: | XR8 MOKE [ Sun Apr 24, 2005 6:36 pm ] |
Post subject: | |
czerial wrote: wow, now lets get back to the land of those that dont have never ending bank accounts aye
![]() ![]() dude id keep the 1293, put a supercharger kit on it from link and see how that goes ![]() Link Want something like $10,000 for a supercharged motor.... ![]() ![]() ![]() ![]() ![]() ![]() i dont think so! I read in *mini modz* i can get a kit for $850, supercharger and HIF6 Crabe for another $400 or so.... much cheaper ![]() ![]() |
Author: | 9YaTaH [ Sun Apr 24, 2005 7:51 pm ] |
Post subject: | Options |
Toyota Starlet Suzuki GT1 Subbie as per AWD Moke in WA |
Author: | Lillee [ Sun Apr 24, 2005 8:00 pm ] |
Post subject: | |
My vote is for a chevy small block V8 conversion! ![]() ![]() |
Author: | Spaceboy [ Sun Apr 24, 2005 10:09 pm ] |
Post subject: | |
a worked 1275 will be hella powerful ![]() a worked 1275 with boost will be scarily powerful ![]() a toyota starlet conversion with turbo will be insanely powerful ![]() |
Author: | min13k [ Mon Apr 25, 2005 12:37 am ] |
Post subject: | |
what about a fully sic 13btt big intercooler rear drive it of course use a chrysler dana 8 inch stronger than i ford nine inch also cheaper ... if you can find one get a two speed slusher matic power glide ........ or just build a good solid a series motor makka |
Author: | XR8 MOKE [ Mon Apr 25, 2005 10:56 am ] |
Post subject: | |
The moke is a 4 seater so with the rear seats so Very little room in the back for a motor. Rear wheel drive moke would be sick tho.... ![]() ![]() Also have a 45DECO weber but on a goose neck manifold.... does it still kick an SU's performance even with the goose neck? I want to try and avoid andy more Mods to the body, its all painted now and don't want to be cutting holes and chipping the paint work. Expensive paint!!! Daniel. |
Author: | kazjim [ Mon Apr 25, 2005 12:46 pm ] |
Post subject: | |
"and don't want to be cutting holes and chipping the paint work. " Well, you've just about rules out ANY engine conversions.... Personally, i would have added a motor and done any mechanicals BEFORE the painwork, but hey, thats just me I'm actually planning a conversion to a moke myself as we speak... 12A 5-speed FWD . . . . . ![]() Engineer has approved in concept... Just got to sort the engine / gearbox adaptor, the driveshafts and actually buy a moke and we're good to go ! J |
Author: | XR8 MOKE [ Mon Apr 25, 2005 1:57 pm ] |
Post subject: | |
kazjim wrote: "
Personally, i would have added a motor and done any mechanicals BEFORE the painwork, but hey, thats just me I'm actually planning a conversion to a moke myself as we speak... 12A 5-speed FWD . . . . . ![]() J If i had the big budget i'd too be doing a AWD moke. Sounds like a big conversion for a motor that only put out around 1146cc?? If i stick too a blown 1293cc im sure that'll suit my needs ![]() ![]() |
Author: | awdmoke [ Wed Apr 27, 2005 11:48 am ] |
Post subject: | |
Whack a Jap import SC12 supercharger kit on the 1293 and you'll have all the performance your front tyres can handle - probably more ![]() For drag or short bursts, it's hard to go past the value of nitrous. Put both of the above on, polish the SC12 and you'll have a winner for show & on the strip ![]() |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |