ausmini
https://www.ausmini.com/forums/

Re83 Cam charged
https://www.ausmini.com/forums/viewtopic.php?f=5&t=70011		 Page 1 of 2
Author:  NG [ Thu Apr 07, 2011 8:40 pm ]
Post subject:  Re83 Cam charged
hey is anyone running this N/A & charged.

what diff,, how do you think it is for everyday???

is it lumpy? hard in traffic?
Author:  michaelb [ Thu Apr 07, 2011 9:07 pm ]
Post subject: 
I have an RE83T cam sitting in my new engine.

Sorry no help at this stage and at the speed I am moving I think I am a few months away from driving the car
Author:  NG [ Thu Apr 07, 2011 9:09 pm ]
Post subject: 
ok cool what boost are you running & diff ratio?
Author:  michaelb [ Thu Apr 07, 2011 9:18 pm ]
Post subject: 
Hi nick

I have a VMAXSCART kit to bolt on and the choice of a 2.9:1 or 3.1:1 diff
Author:  NG [ Thu Apr 07, 2011 9:30 pm ]
Post subject: 
ok great. i'm going to run 3.1 in mine.

my cam right now is rubbish has nothing.
Author:  michaelb [ Thu Apr 07, 2011 10:26 pm ]
Post subject: 
What do you mean by rubbish?
I have another GR cam in my Cooper S which has no Power below 2500rpm and is great around 4500. :)
Author:  drmini in aust [ Thu Apr 07, 2011 10:29 pm ]
Post subject: 
michaelb wrote:
What do you mean by rubbish?
I have another GR cam in my Cooper S which has no Power below 2500rpm and is great around 4500. :)

And I have yet another GR cam in my 1360 which lights the tyres at 5000 and spins em to 8000... 8)

Note both the RE83 and RE13T cams has a greater LCA angle for turbo and S/C use, this is so you don't blow all the fuel mix out the exhaust due to too much valve overlap. This makes it feel soft without any boost, compared to the regular RE83 and RE13.

[edit] oops like michaelb I assumed you had an RE13T in it already!!!
Your later post says otherwise...:oops:
Author:  NG [ Thu Apr 07, 2011 10:33 pm ]
Post subject: 
It's very very mild close to a stock it's a A+ cam mild as

Nothing like a cooper s cam
Author:  michaelb [ Thu Apr 07, 2011 10:37 pm ]
Post subject: 
What size rockers are you running? 1:3?
Author:  NG [ Thu Apr 07, 2011 11:08 pm ]
Post subject: 
Yep 1.3
Author:  craig goss [ Fri Apr 08, 2011 3:54 pm ]
Post subject: 
Have a look on the Wade cam website- they have some real good cam profiles and it only cost $120 inc postage for them to do a grind. the 240 profile is a real good one.
Author:  NG [ Fri Apr 08, 2011 4:20 pm ]
Post subject: 
going to go for the Re83 it's will be good for my set up.
Author:  mini13 [ Sat Apr 09, 2011 2:11 am ]
Post subject: 
Whats the deal with the RE83T? hotter than the 13T?

any hints to specifically whats different?
Author:  Lillee [ Sat Apr 09, 2011 11:39 am ]
Post subject: 
Have you tried calling the man himself and asking him??
Author:  Super-mini [ Sat Apr 09, 2011 6:43 pm ]
Post subject: 
it might be a bit expensive to call from the UK, not to mention calling at the correct time?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/