ausmini • View topic - 1505 crank into A+ engine. will it fit ?

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

1505 crank into A+ engine. will it fit ?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

justfanginaround

Post subject: 1505 crank into A+ engine. will it fit ?

Posted: Sun Jun 19, 2011 7:19 pm

998cc

Joined: Tue Sep 19, 2006 1:20 pm
Posts: 883
Location: Airport West

Will a 1100s crank fit into a 1275 A+ block ?

Do I need anything special to do it ?

Cheers Jon

_________________
120bhp with 450kg just fun waiting to happen

We were prob. drunk when we set it up last and thought this will be a good idea

Top

drmini in aust

Post subject:

Posted: Sun Jun 19, 2011 7:25 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW

Sure it will fit in as stroke is under 86mm, and if it's a stroker the S conrods will fit too- although there is a little less room in there than in the A series 1275 block.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Last edited by drmini in aust on Sun Jun 19, 2011 7:27 pm, edited 1 time in total.

Top

adamstuart

Post subject:

Posted: Sun Jun 19, 2011 7:27 pm

1275cc

Joined: Tue Sep 15, 2009 11:12 am
Posts: 3398
Location: Quakers Hill Sydney

Just a quick question, since things seem to be answered:

Why are you putting an 1100 crank into a big bore?
Don't have access to a 1275 crank I presume?

_________________
You're so square
Baby I don't care

Top

drmini in aust

Post subject:

Posted: Sun Jun 19, 2011 7:27 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW

1100S crank IS a big bore one. They are 1275cc.
The 12G1505 has bigger crankpins so it can be stroked 3mm like in my 1412.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Last edited by drmini in aust on Sun Jun 19, 2011 7:28 pm, edited 1 time in total.

Top

1098

Post subject:

Posted: Sun Jun 19, 2011 7:28 pm

848cc

Joined: Thu Jun 16, 2011 10:23 am
Posts: 159
Location: Balmain NSW

1100S, Adam... It's a Morris 1100'S' engine

Top

justfanginaround

Post subject:

Posted: Sun Jun 19, 2011 7:37 pm

998cc

Joined: Tue Sep 19, 2006 1:20 pm
Posts: 883
Location: Airport West

thanks for the quick reply.

73.5mm bore X 85.00mm stroke = 1443cc.

should be fun in the back of the FANG.

_________________
120bhp with 450kg just fun waiting to happen

We were prob. drunk when we set it up last and thought this will be a good idea

Top

adamstuart

Post subject:

Posted: Sun Jun 19, 2011 8:01 pm

1275cc

Joined: Tue Sep 15, 2009 11:12 am
Posts: 3398
Location: Quakers Hill Sydney

Ahh.
The 's' Was lower case, so I missed it!

Going blind in my old age, don't mind me.
I swear that clubman was brown too..

_________________
You're so square
Baby I don't care

Top

CARTER_GT

Post subject:

Posted: Mon Jun 20, 2011 5:26 pm

1098cc

Joined: Wed Jun 30, 2010 8:43 pm
Posts: 1731
Location: Melbourne

justfanginaround wrote:

thanks for the quick reply.

73.5mm bore X 85.00mm stroke = 1443cc.

should be fun in the back of the FANG.

NO,NO,NO,NO,NO you need to put it in the LS so next time im around i can look at it.

Top

Page 1 of 1

[ 8 posts ]

Board index » Mini Chat » Mini & A/A+ Series Mods

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: