| ausmini https://www.ausmini.com/forums/ |
|
| New Booster Mounting https://www.ausmini.com/forums/viewtopic.php?f=5&t=73439 |
Page 1 of 1 |
| Author: | Callin [ Thu Oct 06, 2011 5:18 pm ] |
| Post subject: | New Booster Mounting |
Hi guys, got a cooper booster a while ago and now im trying to mount it. Does it matter where the booster is actually mounted as long as it has vac, line from the mater cyl and line back to the splitter? Also on the booster, which is in and out? In at the drum and out at the tip? AND is there any specific way of bleeding the new line through the booster or just like normal? Thanks 
|
|
| Author: | Harley [ Thu Oct 06, 2011 5:48 pm ] |
| Post subject: | |
Boosters can be mounted nearly anywhere (I've seen some under the dash) but remember that longer runs and a lower booster may be trickier to bleed. The servo (drum thing) end connects to the master cylinder. |
|
| Author: | drmini in aust [ Thu Oct 06, 2011 6:11 pm ] |
| Post subject: | |
The pointy end should be tilted up a bit to facilitate bleeding (this more important with the old Lockheed ones though). |
|
| Author: | Callin [ Sat Oct 08, 2011 8:10 am ] |
| Post subject: | |
Thanks guys  hopefuly make a bracket for it today
|
|
| Author: | Wombat [ Sat Oct 08, 2011 9:07 am ] |
| Post subject: | |
Hydroboost sell the right bracket Think I paid $22 for mine |
|
| Author: | Callin [ Sat Oct 08, 2011 9:11 am ] |
| Post subject: | |
Oh ive got a bracket on it, but is going in a weird spot and im happy to make a new one anyway |
|
| Author: | Callin [ Tue Oct 11, 2011 5:51 pm ] |
| Post subject: | |
well i got it mounted the other day..... 
Appart from the engine bay being completly ugly anyway i think it fits rather well
Just need new lines and a bleed. What size fittings do i need to get? And will the fittings work with some trailer brake line i have? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|