I've got one of those set ups on my race car. I haven't done any dyno testing yet, so cannot validate their claims of increase HP. What I can tell you is with a six inch manifold, I can't get the filter off, and I'm running a fairly large air box
| ausmini https://www.ausmini.com/forums/ |
|
| Med filter kit for 45 webber https://www.ausmini.com/forums/viewtopic.php?f=5&t=81273 |
Page 1 of 1 |
| Author: | davem [ Mon Apr 29, 2013 7:11 am ] |
| Post subject: | Med filter kit for 45 webber |
Was wondering if anyone has had any first hand experience with this med intake kit for a 45 webber, at the moment I'm running a redline manifold 3005 and a ram flow filter. http://www.med-engineering.co.uk/catalo ... ake-system |
|
| Author: | Rookiepilot [ Mon Apr 29, 2013 6:38 pm ] |
| Post subject: | |
I've got one of those set ups on my race car. I haven't done any dyno testing yet, so cannot validate their claims of increase HP. What I can tell you is with a six inch manifold, I can't get the filter off, and I'm running a fairly large air box
|
|
| Author: | Lillee [ Tue Apr 30, 2013 10:16 am ] |
| Post subject: | Re: Med filter kit for 45 webber |
davem wrote: Was wondering if anyone has had any first hand experience with this med intake kit for a 45 webber, at the moment I'm running a redline manifold 3005 and a ram flow filter.
http://www.med-engineering.co.uk/catalo ... ake-system If you don't have a weber box built into the firewall, you won't have much choice in the matter... FYI see discussion about weber boxes: http://www.ausmini.com/forums/viewtopic.php?t=81275 |
|
| Author: | drmini in aust [ Tue Apr 30, 2013 7:29 pm ] |
| Post subject: | |
Ramflo filter works fine on a 45 once you bin the Lynx foam and put a Unifilter LNX400 pad in it instead. My 1412 made the same 114HP on the engine dyno (using a 45 Dellorto), both with and without the Unifilter pad in. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|